Fordmods Logo

Idle plate? cracked? 

 

Page 1 of 1 [ 5 posts ] 

 
 Post subject: Idle plate? cracked?
Posted: Thu May 12, 2005 4:24 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

When I took my car to the LPG mechanic over a year ago he reckoned me ECU was stuffed. Reason being is that on either fuel revs sometimes - quite often hunt when idling. Usually it's only 100 to 300 difference in hunting (e.g. the revs might range from 600 to 800 and slowly go back and forth).
Anyways, I left it at that drove the car around, and next time I went back (over 6 months ago and I think the converter bust and I had a new one fitted and that) he said the problem was still there and that it's not the ECU, it's actually the idle plates cracked. So anyone wanna tell me about this? I can't seem to see anything cracked on or around the throttle body, and there's no way I'm paying anyone else to fix it.
It's not a high priority - as you can tell, but it's just another thing I'd like to get fixed! By the way, it's definately not the ECU as I just fitted an EF Tickford XR6 one and it's still there. The cars auto but that should make much of a difference.
Top
 Profile  
 
 
Posted: Thu May 12, 2005 9:50 pm 
Getting Side Ways
Offline
User avatar

Age: 52

Posts: 1751

Joined: 5th Nov 2004

Gallery: 1 images

Ride: BA ute, FG XR6T

Location: Quakers Hill
NSW, Australia

you could spray some WD or carb cleaner around the effected area and see how badly it does affects idle/revs. If theres a vacuum leak it should. would give some indication if that was the area of concern.
How does it rev (once warm) with the iac disconnected?

You could consider also that a bad earth could have an affect on idle. I'm currently experiencing that now on the windscreen fan motor, whenever its running. Perhaps conduct your diagnostics with all sundry devices turned off. It obviously wouldn't be playing up when the second thermo kicks in?

 

_________________

Image

Top
 Profile  
 
 
Posted: Thu May 12, 2005 10:05 pm 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

mmm ssounds liek it could be the ISC

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Thu May 12, 2005 10:11 pm 
Getting Side Ways
Offline
User avatar

Age: 71

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

If you turn idle up alittle does it make any difference ?
Disconnect isc adjust idle then reconnect isc...[idle speed control] has any names..Like iac etc...

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Top
 Profile  
 
 
Posted: Fri May 13, 2005 12:59 am 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

I've cleaned out the ISC. Playing with the idle doesn't fix it.
Sometimes, very rarely after some spirited driving, I'll get home and put the car into neutral while getting out the garage door remote before putting it into reverse and the car'll start reving it's self up a bit and sit at around 2,000rpm.
I've recently changed the MAP sensor aswell, didn't effect it.

The thing is that it's not all the time that it hunts and that - it does it every time the cars started now, but that's only started sinc ehte new cam and goes aay pretty quickly. Then most traffic lights and stand stills it's fine, but a lot of them it'll hunt a little.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 5 posts ] 

Who is online

Users browsing this forum: Google [Bot], Google Adsense [Bot] and 49 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Nov 23, 2024 10:14 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names