|
charlie4401 |
|
||
|
hi guys/ just fittrd t5 to my EF it now idles at 1300 revs, when it was auto idle speed was 750, its a stock engine with pod filter and opt 20 police ECU. any ideas please its realy pissin me off = = = thanks
|
||
Top | |
voxace |
|
|||
|
Just turn the screw down on the throttle body.
Alternatively, search for "base idle", and you will find the proper procedure for adjusting the idle. |
|||
Top | |
rushed |
|
|||
|
just back the idle screw back until its gets to 800ish its on the left side of the t/body if your standing on the drivers side of the car to adjust.
|
|||
Top | |
Johnson stroker |
|
|||
|
also check your ISC, Mine just died in the a**, revs sat at 1300rpm. disconnected it and reset the base idle and 750rpm idle.
_________________
|
|||
Top | |
snap0964 |
|
|||
|
If it's still running the auto computer, you probably only need to add the neutral resistor, as per the conversion doco. 6.8kohm.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
Top | |
charlie4401 |
|
||
|
problem solved/ still running auto ecu as noted by snap, where do i find doco re idle resistor .at the moment ive blocked off isc with blank gasket and reconected wiring..... will this do any damage ...thanks for the help
|
||
Top | |
fiftyone |
|
|||
|
shouldnt. it just wont raise the idle when the battry is a little low, ac is on or in gear
_________________ ** For Sale ** http://www.fordmods.com/ford-parts-for-sale-f17/assorted-e-series-parts-t124697.html |
|||
Top | |
Who is online |
---|
Users browsing this forum: Google [Bot] and 72 guests |