|
| johnandcanny |
|
||
|
Hi to all,
As you may have worked out with my past posts. Ive been working on the vehicle for many hours and days. To all you guys who experience , running rough at idle, and good at all other speeds , with the occcasional miss at road speed. The problem has been nailed at long last. The crank angle sensor that is mounted on the front of the timing cover was covered in soot. Removed it from the vehicle and the eye was also covered. I used some carby cleaner and some rags and got it squeky clean. Reinstalled it and now runs as smooth as a clock. Do try this as it is almost always overlooked . |
||
| Top | |
||
| 4.9 EF Futura |
|
|||
|
That's a great, simple solution. If i had a dollar for every 6cylinder rough idle thread that was posted....
Some good work there.
_________________ I promise..... I will never die. |
|||
| Top | |
|||
| OBS35N |
|
|||
|
how do i get to the crank angle sensor?
is it a big job and where is it?
_________________ OBS35N is gooonnnneeee.
|
|||
| Top | |
|||
| 4.9 EF Futura |
|
|||
|
Should be on the front of the engine, reads the teeth on the back of the harmonic balancer IIRC
I assume EF/AU only for this remedy...
_________________ I promise..... I will never die. |
|||
| Top | |
|||
| OBS35N |
|
|||
|
can anyone get a pic as i dont know where this is
anyone have one handy?
_________________ OBS35N is gooonnnneeee.
|
|||
| Top | |
|||
| OBS35N |
|
|||
|
anyone?
_________________ OBS35N is gooonnnneeee.
|
|||
| Top | |
|||
| opto |
|
|||
|
Quote: how do i get to the crank angle sensor?
is it a big job and where is it? If you haven't got one I can sell you one...... Just Kidding....
_________________ I post here cos the russian tank driver doesn't |
|||
| Top | |
|||
| johnandcanny |
|
||
|
To obs35n .
The sensor is on the timing cover, exactly above the harmonic balancer , in the middle. It has 2 wires attached to it, undo the plug and get a 7 mil socket and ratchet and undo 2 bolts. remove the sensor clean it, and then reinstall it. hope that helps. |
||
| Top | |
||
| OBS35N |
|
|||
|
is that the one on the top of the throttle body?
_________________ OBS35N is gooonnnneeee.
|
|||
| Top | |
|||
| Walkinshaw |
|
||
|
John, Only EF and AU's have this sensor.
_________________ Soo many idiots. So few bullets |
||
| Top | |
||
| johnandcanny |
|
||
|
Yep thats correct, ef and au .
The car i worked on is an ef falcon. |
||
| Top | |
||
| johnandcanny |
|
||
|
To ob again.
Nah not the throttle body. the crankshaft harmonic balancer. hope this helps mate. |
||
| Top | |
||
| Rick_Deckard |
|
|||
|
Can someone take pics of where and what to remove? YOu know me, I need that kind of thing, lol.
_________________ E39 523i |
|||
| Top | |
|||
| Gaz |
|
||
|
as promised OBS35N
well not exactly.. net wasnt working when i got home from uni.. so i had to do it after work.. yes its 12:30am yes the image is half a meg, no i couldnt be bothered resising it, so now u have a very large image
_________________ 2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows |
||
| Top | |
||
| OBS35N |
|
|||
|
cheers mate this will be very useful
*wonders if the guys that rebuilt my engine put a new sensor in?*
_________________ OBS35N is gooonnnneeee.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 98 guests |
