Fordmods Logo

Induction noise after head gasket fix - why? 

 

Page 1 of 1 [ 5 posts ] 

 
 Post subject: Induction noise after head gasket fix - why?
Posted: Thu May 28, 2009 3:09 pm 
Getting Side Ways
Offline
User avatar

Age: 55

Posts: 2537

Joined: 5th Nov 2004

Gallery: 13 images

Ride: EFII Fairmont

Location: Perth
WA, Australia

Yeah I have this whine coming from top to rear of engine. I don't think it's pulleys as it started after the head gasket fix.

Has anyone experienced a pronounced whine after a head gasket.

My head was shaved and all bores cleaned out.

One think I did do wrong was accidentally over fill the oil by almost 2 1/2 litres. So 8L instead of 5.5L. And drove like that for a few days before releasing some.
Could that f**k anything up?
Top
 Profile  
 
 
 Post subject: Re: Induction noise after head gasket fix - why?
Posted: Thu May 28, 2009 3:19 pm 
Fordmods Addict
Offline
User avatar

Age: 38

Posts: 7958

Joined: 1st Jun 2005

Gallery: 13 images

Ride: Falcon

Power: 237 rwkw

Location: Melbourne
VIC, Australia

A whine?
You sure it's not coming from the front of the motor, as in timing chain?
What'd you do with the tensioner?

 

_________________

ED XR8 Sprint - S-Trim, V500, 249rwkw
BF MKII F6 Tornado - 237rwkw

Top
 Profile  
 
 
 Post subject: Re: Induction noise after head gasket fix - why?
Posted: Thu May 28, 2009 3:28 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 1629

Joined: 8th Jul 2007

Gallery: 21 images

Ride: EL F100 CAPRI XR EF

Power: 234 rwkw

Location: brighton
SA, Australia

+1 for the tensioner, take the rocker cover off and start it up for a few seconds might see something or be able to suss the noise more

ps. dont rev it or oil will go everywhere
Top
 Profile  
 
 
 Post subject: Re: Induction noise after head gasket fix - why?
Posted: Thu May 28, 2009 4:00 pm 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

a whine or a hiss? Does it feel like you have lost power overall?

Might be the rocker gasket not on properly...may have slipped off leaving a small gap.

If not maybe exhaust manifold gasket might be the wrong way around and leaving a gap on the underside...I did that mistake :shock:

phong =P~

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
 Post subject: Re: Induction noise after head gasket fix - why?
Posted: Thu May 28, 2009 4:48 pm 
Getting Side Ways
Offline
User avatar

Age: 55

Posts: 2537

Joined: 5th Nov 2004

Gallery: 13 images

Ride: EFII Fairmont

Location: Perth
WA, Australia

Yeah could be manifold gasket. Flares a little when starting. I'll test that with carby cleaner.
Definatelty a whine rather than hiss. You can hear is inside the cabin, changes up and down in pitch as it goes through the first couple of gears, then goes away after about 70kmh.

Rocker gasket does leak slightly at the front.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 5 posts ] 

Who is online

Users browsing this forum: Google Adsense [Bot] and 42 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu Nov 28, 2024 1:32 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names