Fordmods Logo

inside of TB and manifold coated with black grease 

 

Page 1 of 2 [ 17 posts ] Go to page 1, 2  Next

 
 Post subject: inside of TB and manifold coated with black grease
Posted: Thu Nov 11, 2004 9:53 am 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 577

Joined: 5th Nov 2004

Gallery: 1 images

Ride: EL XR6 5spd

I just had a look inside my TB and its covered in oily tar and it seems to get worse the further in ya go! this cant be good im sure. But apart from some lpg backfires I cant think what could have caused it (if that even)

Ive heard oil based air filters can suck oil into your intake but that doesnt explain why the plastic intake piping is clean.

 

_________________

EL XR6 5spd

Top
 Profile  
 
 
Posted: Thu Nov 11, 2004 10:29 am 
Site Admin
Offline
User avatar

Age: 41

Posts: 8833

Joined: 18th Dec 2002

Gallery: 6 images

Ride: AUII V8 LTD

Power: 270 rwkw

Location: Sydney
NSW, Australia

It would be engine oil vapour. possibly blow-by from your PCV system.

 

_________________

WAG363: AUII LTD Supercharged 363 Dart Stroker [Supercharged 363 LTD Build]
WAGGIN: 2012 Volkswagen Passat Wagon - V6 4Motion.

Top
 Profile  
 
 
Posted: Thu Nov 11, 2004 10:39 am 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 577

Joined: 5th Nov 2004

Gallery: 1 images

Ride: EL XR6 5spd

ya is right.. I just looked at where the breather hose joins (further back on the plastic on mine for lpg) .. same s**t localised all around it.

 

_________________

EL XR6 5spd

Top
 Profile  
 
 
Posted: Thu Nov 11, 2004 10:41 am 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 577

Joined: 5th Nov 2004

Gallery: 1 images

Ride: EL XR6 5spd

lol s**t got *'s how s**t. has FM always done that??

 

_________________

EL XR6 5spd

Top
 Profile  
 
 
Posted: Thu Nov 11, 2004 11:34 am 
Getting Side Ways
Offline

Age: 38

Posts: 509

Joined: 7th Nov 2004

Gallery: 9 images

Ride: '05 5.4L BA MK2 XT

Location: Sydney
NSW, Australia

yeah it has...

My TB was coated in oil the other week when i over filled my engine with oil, i'd say it could be splashing up into the intake or something.
I cleaned the intake out yesterday after an oil change i'll let you know if its covered again this arvo
Top
 Profile  
 
 
Posted: Thu Nov 11, 2004 11:58 am 
Site Admin
Offline
User avatar

Age: 41

Posts: 8833

Joined: 18th Dec 2002

Gallery: 6 images

Ride: AUII V8 LTD

Power: 270 rwkw

Location: Sydney
NSW, Australia

Bug wrote:
lol s**t got *'s how s**t. has FM always done that??


there is a swear filter. It can be turned on/off in your profile.

 

_________________

WAG363: AUII LTD Supercharged 363 Dart Stroker [Supercharged 363 LTD Build]
WAGGIN: 2012 Volkswagen Passat Wagon - V6 4Motion.

Top
 Profile  
 
 
 Post subject: Re: inside of TB and manifold coated with black grease
Posted: Thu Nov 11, 2004 10:00 pm 
Fordmods Newbie
Offline
User avatar

Posts: 4

Joined: 6th Nov 2004

Ride: AUII XR8

Location: Melbourne
VIC, Australia

Bug wrote:
I just had a look inside my TB and its covered in oily tar and it seems to get worse the further in ya go! this cant be good im sure. But apart from some lpg backfires I cant think what could have caused it (if that even)


Completely normal. Some oil from the PCV/oil breather pipes, some coming back from the inlet valves.
Top
 Profile  
 
 
Posted: Thu Nov 11, 2004 10:12 pm 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 577

Joined: 5th Nov 2004

Gallery: 1 images

Ride: EL XR6 5spd

So what kinda impact does the PCV system have on combustion?
I cant imagine all the oily vapor helping things very much.

 

_________________

EL XR6 5spd

Top
 Profile  
 
 
Posted: Fri Nov 12, 2004 12:00 am 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 1037

Joined: 5th Nov 2004

Gallery: 1 images

Ride: V8 T5 Fairmont & BA XR6T

Location: Sydney
NSW, Australia

My logic is that because oil isnt as volatile as petrol it would have a slower burn rate and actually act like an octane booster, but on the other side it could also compression ignite because it wont completely mix with the fuel on the way in. Surely Ford would have worked this out when they designed the system, and although its sole purpose is to eliminate the release of hydrocarbons due to blow by, it would have to have other positive results such as valve lubrication

 

_________________

Dima, Mitch & Jay's RPD

Top
 Profile  
 
 
Posted: Fri Nov 12, 2004 12:13 am 
Site Admin
Offline
User avatar

Age: 41

Posts: 8833

Joined: 18th Dec 2002

Gallery: 6 images

Ride: AUII V8 LTD

Power: 270 rwkw

Location: Sydney
NSW, Australia

Apparently oil vapour will lead to detonation, which is why people insist on breaking emissions law and venting the oil vapour into the atmosphere.

I was told my tired EF block (250,000km+ with 10:1 compression) was pinging due to the high amounts of oil vapour from the worn rings. Since the new engine has gone in, with an even higher compression ratio (11.7:1) there havent been any detonation issues - so it would appear that the theory is right.

 

_________________

WAG363: AUII LTD Supercharged 363 Dart Stroker [Supercharged 363 LTD Build]
WAGGIN: 2012 Volkswagen Passat Wagon - V6 4Motion.

Top
 Profile  
 
 
Posted: Fri Nov 12, 2004 6:49 pm 
Fordmods Newbie
Offline
User avatar

Posts: 4

Joined: 6th Nov 2004

Ride: AUII XR8

Location: Melbourne
VIC, Australia

Waggin wrote:
Apparently oil vapour will lead to detonation, which is why people insist on breaking emissions law and venting the oil vapour into the atmosphere.


Some highly boosted turbo cars suffer from lots of oil vapour 'blow by' and so many install oil 'catch cans' in the hose going back into the inlet manifold. In these instances it is said that the 'blow by' definitely caused detonation (yeh, but what about the 25 pounds boost!).

I tried this on my old turbo car and caught stuff all oil over 1,000 kms, so I took it off.
Top
 Profile  
 
 
Posted: Sun Nov 14, 2004 9:15 pm 
Fordmods Newbie
Offline

Age: 48

Posts: 15

Joined: 14th Nov 2004

Ride: BA

Location: sydney
NSW, Australia

if you have a mixer type LPG system which most are, the grease is probably from the LPG. It's harmless although over time can collect and cause probs with electronic throttles.

 

_________________

BA Futura with Multipoint Liquid Phase LPG Injection, full sick tissue box

Top
 Profile  
 
 
Posted: Sun Nov 14, 2004 10:09 pm 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 577

Joined: 5th Nov 2004

Gallery: 1 images

Ride: EL XR6 5spd

flukey wrote:
if you have a mixer type LPG system which most are, the grease is probably from the LPG. It's harmless although over time can collect and cause probs with electronic throttles.


I do so that explains it :)

Tell me about your injected lpg system!!
Cost/performance/where the hell u got it :):)

 

_________________

EL XR6 5spd

Top
 Profile  
 
 
Posted: Sun Nov 14, 2004 10:50 pm 
Fordmods Newbie
Offline

Age: 48

Posts: 15

Joined: 14th Nov 2004

Ride: BA

Location: sydney
NSW, Australia

It's just like an EFI system except LPG is injected. The neat thing is that when the LPG is injected, it vapourises and gives a bit of intercooling.
Cost, no idea
Performance is the same as petrol
We develop LPG systems in my company so that's how I got it

It's all prototype stuff we are playing around with at the moment but I have done 50000 with it on my BA and it's still going strong.

I'm hoping to get along to a cruise one day so folks can have a look.

ps no grease collecting on the throttle either :)

 

_________________

BA Futura with Multipoint Liquid Phase LPG Injection, full sick tissue box

Top
 Profile  
 
 
Posted: Sun Nov 14, 2004 11:07 pm 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 577

Joined: 5th Nov 2004

Gallery: 1 images

Ride: EL XR6 5spd

sounds very sweet.. I want to see it badly.. and then own it :P

 

_________________

EL XR6 5spd

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 2  [ 17 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: Google Adsense [Bot] and 78 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Nov 23, 2024 6:18 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names