|
| Froudey |
|
||
|
hey y'all just finshed putting a kenwood cd player in the neighbours car she owns a eb with smartlock and here it gos
i installed the cd player in fine accidently blew a fuse for the radio and cig liter and i replaced that. any way finshed installing it and went home not 5 minutes later she came over and asked if i can reprogram her remotes cause they wouln't work read the book yeah started to do that. about 20 minutes of playing it wasn't working for me (cause i did it a week before second go got it.) then i had a thought start the car...... car just cranked and cranked and cranked read the book again turned the car to the "on" postion waited half an hour and started the car up i let it run for a bit turned it off and then tried to start it again cranked etc etc no go. so how can i reset smart lock, is it as simple of taking the battery terminal off for a few hours or anything simple cheers
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| Froudey |
|
||
|
Help any one even dodgey comments will help.
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| TROYMAN |
|
||
|
hi
check the interior light fuse.. as the smartlock fuse is the interior light fuse on some models..??? but im not sure if that is the same on eb??? hope this helps... |
||
| Top | |
||
| twase |
|
|||
|
If it is cranking then I don't think it is smartlock related. As mentioned check all fuses again.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| Mechan1k |
|
||
|
Check BEM earth .... same thing happened after I had a headunit intstalled in my XG ute ... earth was knocked to the BEM ... causing a dodgy connection .... ute failed to start.
_________________ 04 Territory TX AWD - Winter White - optioned up |
||
| Top | |
||
| stomper |
|
|||
|
TMAN NK wrote: hi
check the interior light fuse.. as the smartlock fuse is the interior light fuse on some models..??? but im not sure if that is the same on eb??? hope this helps... Thats right.... In fords with smart lock the CRT LMP fuse or similar blows and what happens is it kills power to the BEM. This is why the Smarklock remotes will not work. It is cranking but not starting because the BEM is not getting power therefore it is not telling the ECU to enable the injectors. I hope this fixes your problems (i have had the EXACT sane thing with my EF before)
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| MooseMan |
|
|||
|
yes its the CRT_LMP fuse. I had exactly the same problem. The smartlock immobiliser is stuck on and thats why it wont start. Even in the fuse doesnt look blown just change it because mine didnt looked f**k but it was.
http://www.fordmods.com/forums/viewtopi ... highlight= thats my topic about it.
_________________
|
|||
| Top | |
|||
| Brett-one |
|
|||
|
hey i shorted out my crt_lmp fuse some time ago since then if i turn the key to start the motor it cranks over for a bit and then starts but if you turn the key to power the fuel pump and all but not to startthe car a few time then try to strat it, it starts no problem
nay one have this what could it be sound like the same problem
_________________
|
|||
| Top | |
|||
| twase |
|
|||
|
perhaps you need to reset the ECU by removing power for 30 minutes.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| Brett-one |
|
|||
|
ok ill go try
_________________
Last edited by Brett-one on Sun Sep 03, 2006 10:13 pm, edited 1 time in total. |
|||
| Top | |
|||
| TURBO_GHIA |
|
|||
|
connect BOTH green and yellow wires to to the battery cable
_________________ HMMMM BOOST !!!
|
|||
| Top | |
|||
| stomper |
|
|||
|
twason wrote: If it is cranking then I don't think it is smartlock related. As mentioned check all fuses again.
Its cranking but not starting and you havnt touched anything to do with the smart lock besides the CRT_LMP then yes it is smartlock related. If the CRT_LMP is blown the smartlock isnt getting power and if it doesnt get power the ECU dont get the message to enable the injectors.
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| flyin2high |
|
||
|
hey dude u mit of just earth the battery out check the earth wire runnin into the cd player its not the smartlock
|
||
| Top | |
||
| smiley235 |
|
|||
|
flyin2high wrote: hey dude u mit of just earth the battery out check the earth wire runnin into the cd player its not the smartlock
?? what, that doesn't make sense.
_________________ 178.3 rwkw
|
|||
| Top | |
|||
| twase |
|
|||
|
stomper wrote: twason wrote: If it is cranking then I don't think it is smartlock related. As mentioned check all fuses again. Its cranking but not starting and you havnt touched anything to do with the smart lock besides the CRT_LMP then yes it is smartlock related. If the CRT_LMP is blown the smartlock isnt getting power and if it doesnt get power the ECU dont get the message to enable the injectors. Well I could be wrong but my impression was that smartlock disables the starter and the ECU. I checked the smartlock documentation and it agrees with me, here is a quote from it Quote: The immobilised state is indicated by the Smartlock warning jewel (LED) as a rapid flash rate. The system enters the immobilised state if Smartlock receives at least two incorrect codes when the ignition switch is turned to On. When the car is in the immobilised state, you cannot start the engine, as the BEM has disabled both the starter motor, and the EEC-V system. If the cause of the immobilisation is a corruption of the codes during transfer, you should be able to start the car on the second attempt.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 59 guests |
