|
| bondy99 |
|
||
Age: 65 Posts: 1128 Joined: 13th Sep 2010 Ride: Ford Falcon AU 2000 Series II Location: Crestmead |
Last few days I've been hearing a noise coming from the engine bay, I don't know if the engine oil needs to be thicker or I've got noisy tappets.
Usually I get this noise when the engine is cold on start up then goes away once engine oil is up. I assume this is normal. On some occasions when I accelerate to higher speed I hear that similar noise on the odd occasion. After arriving at destination, switch off engine, 10 minutes later turn motor on, I get the same noise as if it was a cold start. Has this happened to anyone else and what was the cause? Thanks |
||
| Top | |
||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
Sometimes having dry pullys or a crook belt tensioner can give of tappet noise symptoms.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| bondy99 |
|
||
Age: 65 Posts: 1128 Joined: 13th Sep 2010 Ride: Ford Falcon AU 2000 Series II Location: Crestmead |
Hi 93EB,
Oh ok, I would never have been aware of that. Is there anyway of checking to see which pully would be the cause. Belt tensioner seems to be still within tolerance i.e. belt not slack. |
||
| Top | |
||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
Its usually the idler pulley or the pulley on the belt tensioner. (My experience)
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| bondy99 |
|
||
Age: 65 Posts: 1128 Joined: 13th Sep 2010 Ride: Ford Falcon AU 2000 Series II Location: Crestmead |
I'll hunt around for another, I best replace both pulleys just to be sure.
Thanks for the help |
||
| Top | |
||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
They are cheap so worth doing anyway
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| bondy99 |
|
||
Age: 65 Posts: 1128 Joined: 13th Sep 2010 Ride: Ford Falcon AU 2000 Series II Location: Crestmead |
What way would be best, via Supercheap or via Ebay?
|
||
| Top | |
||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
I got mine from a bursons like store.
I think one is even genuine. They are pretty cheap. I believe AU and BA are the same. Dont take my word. Maybe ask a mechanic to see if he agrees with me first. That was my issue.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| bondy99 |
|
||
Age: 65 Posts: 1128 Joined: 13th Sep 2010 Ride: Ford Falcon AU 2000 Series II Location: Crestmead |
No probs, there is a Burson store in Underwood, I'll give them a call.
Does one need to have a part number or just ask for idler and tension pulley for Ford AU2? Cheers |
||
| Top | |
||
| Mad2 |
|
|||
|
bondy99 wrote: No probs, there is a Burson store in Underwood, I'll give them a call. Does one need to have a part number or just ask for idler and tension pulley for Ford AU2? Cheers EF to AU use the same belt tensioner. take the belt off & then hand check the pulleys, even leave belt off & do a short run test to see if still there with belt off [don't need to run for long]. noise 'may' also be the harmonic balancer rubber deteriorating & letting it rotate on the crank. to check that leave engine off & pull on belt hard from below steering pump & up towards pump [had that & that is what i did]. |
|||
| Top | |
|||
| bondy99 |
|
||
Age: 65 Posts: 1128 Joined: 13th Sep 2010 Ride: Ford Falcon AU 2000 Series II Location: Crestmead |
Mad2
I'll check all of the pulleys when I can but will replace the idler and tension pulley next week. I can rule out the harmonic balancer, that was replaced with a new one about 16 months ago. can always check it again. Bad timing when these things happen financially wise if it comes to another harmonic balancer, then the tool to remove and install with. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 25 guests |
