Fordmods Logo

ISC problem. 

 

Page 1 of 1 [ 4 posts ] 

 
 Post subject: ISC problem.
Posted: Sat Nov 17, 2012 4:04 pm 
Getting Side Ways
Offline
User avatar

Age: 52

Posts: 3424

Joined: 23rd Dec 2007

Gallery: 32 images

Ride: BA XR6T (mix of BA, BF and FG)

Location: Perth
WA, Australia

Hi all,

I have an odd problem, the little breather on the side of my ISC is sucking air like crazy. So much that when you pull the black plastic cap off it and cover it with your finger, the idle speed drops about 100 rpm.

I tried to look inside one of my old ISCs but could not see what opened and closed that breather.

It can't be normal behaviour or ford would have piped it to the intake for filtered air so there must be something wrong. Unplugging the ISC made no difference to the breather. It still sucked.

Do in need a new ISC?


Cheers

Frank
Top
 Profile  
 
 
 Post subject: Re: ISC problem.
Posted: Sat Nov 17, 2012 4:33 pm 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia

there is supposed to be a little air being sucked into that, its a minor air bypass..but that cap is not ment to come off or be taken off, if the cap is loose enough to be pulled off it will suck more air than its designed to, i believe there should also be a small filter type material in that cap or tube aswell...
Top
 Profile  
 
 
 Post subject: Re: ISC problem.
Posted: Sat Nov 17, 2012 9:15 pm 
Getting Side Ways
Offline
User avatar

Age: 52

Posts: 3424

Joined: 23rd Dec 2007

Gallery: 32 images

Ride: BA XR6T (mix of BA, BF and FG)

Location: Perth
WA, Australia

Good to know thanks.

It was hard to pull off so it isn't loose. However it must have a fault because it wasn't sucking like that before. Its sucking just like if you pull a hose off the vacuum tree and you can hear it whistle from inside the car when it is cold and the isc is open. I might swap it out and see how I go.

Thanks for the tip Troyman.
Top
 Profile  
 
 
 Post subject: Re: ISC problem.
Posted: Thu Dec 13, 2012 4:52 pm 
Getting Side Ways
Offline
User avatar

Age: 52

Posts: 3424

Joined: 23rd Dec 2007

Gallery: 32 images

Ride: BA XR6T (mix of BA, BF and FG)

Location: Perth
WA, Australia

I know why it was sucking extra air now.

I had blocked off the ICS with a hand made gasket in which I'd not cut the two center holes out.

The gasket blew out on one of the holes so it was trying to get all the air though that little filter hole.

I've replaced the gasket with one made from galvanised Tin and put a 1/8th hole on both sides.

Seems pretty good now.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 4 posts ] 

Who is online

Users browsing this forum: Google Adsense [Bot] and 77 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Nov 24, 2024 3:11 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names