|
spinner1987 |
|
||
|
does anyone no where i can get one and how much
|
||
Top | |
phongus |
|
|||
|
Search is your friend.
ecu-fuel-system-eec-f21/tuning-your-falcon-with-a-t-i-performance-j3-chip-t68577.html
_________________ phongus = Post whore 2006 |
|||
Top | |
phongus |
|
|||
|
double post...stupid slow net at work.
_________________ phongus = Post whore 2006 |
|||
Top | |
efxr6wagon |
|
||
|
TI Performance (tiperformance.com.au) do standard chips (GLi, XR6, etc) ready for tuning by your local tuning shop or for tuning yourself. They also do a custom-tuned chip based on your specific mods and ideally using a dyno plot showing existing AFR. At $200 for the chip and about $100 for the dyno run, these are ridiculously cheap and work amazingly well. You could easily pay over $1000 for a Chiptorque or Unichip with a custom dyno tune. I just had mine done, and am extremely pleased with it - best mod I ever did. It's never going to be as perfect a tune as you can get spending half a day or more on a dyno, but based on their experience they can get reasonably close, and for a fraction of the cost.
_________________ 95 EF XR6 wagon, 17" FTRs, DBA rotors, KYB/Koni, AU bottom end, ported EF head, backcut valves, SS Inductions, Territory intake, 10.2 CR, Auckland 1258 cam, vernier gear, PH4480 headers, no cat, Tickford 2.5", 2800rpm stall, J3 chip |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 71 guests |