|
| eb xr6 falcon |
|
||
|
hello today i started my car and theres a knocking sound coming from the sump on idle or i think its from the sump anyway it sounds sort of like a dull clack sounds like a horse steping on concreate. Anyway just wondering what i should do from here i would like to hear from some of you people who have experienced these types of sounds from engines. Time to change the block?
 thanks for any posts
|
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
sounds like your bottom end is shagged. my original 3.9L in my EB started doing it at about 290000kms. so i just did a full engine swap for a tickford engine
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| frd906n |
|
||
|
http://s649.photobucket.com/albums/uu21 ... eo0017.mp4
dosent sound like this does it
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| eb xr6 falcon |
|
||
|
thanks guys yeah sounds abit like that less rapid tho ? got a feelin big ends.?
|
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
wow that vid sounds bad. mine wasn't that bad. but it was still pretty bad
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| frd906n |
|
||
|
mine only happens when hot, in the morning its fine, i was told its my lifters or could be even my timing chain, but im picking up another free engine so i aint worried about it to be honesty, im just gonna try some thicker oil and keep it serviced till it s**t it self
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| Falcon099 |
|
||
|
I had the same thing happen to my EL a couple of years ago, at the time it had 186 on the clock and auto.
Pulled out of the driveway one day and engine stalled completely. Tried to get it started for about 10 minutes with no success, It finally started but it had some horrific knocking exactly like that sound clip. Figured it must be a rod or main bearing I swapped the engine a week later. Probably the cheapest option, they go for around 350-500 bucks at the wreckers depending on what you want and no. of k's |
||
| Top | |
||
| frd906n |
|
||
|
my old engine didnt have this knock at all and it did over 300 000 on the clock, i decided to swap it as it was getting old, so i swapped it with this one i have in there atm, one in the sound clip, and after i put that nulon lifter treat ment in the noise started
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| Falcon099 |
|
||
|
That's weird, could be a coincidence as the first thing I did when it started knocking was change the lifters (my old man was 100% certain it was the lifters and since he knows a lot more than me i thought i should listen). I can tell you it made no difference at all and i was 260 bucks out of pocket.
|
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
it sounds like bottom end. i've learnt from experience. just ask ToranaGuy. he heard it. i just ran a motorcraft filter and 25w60 oil and serviced it every 5000kms for about 35,000kms i drove it. and not puting around too. i gave it some big revs quite often
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| eb xr6 falcon |
|
||
|
yeah ive got all the ticky gear already what sould i do? buy a hole new motor drop it in or just fresh up the bottem end. Just changed the head gasket to mother f#@*ker
|
||
| Top | |
||
| frd906n |
|
||
|
my mech got a qoute to refreshen his bottom end was 800 bucks, acid dipped, honed and bored, pistion rings and bearings and surfaced ground, was 500 for the head, needed a lil work, 400 for a crow cam, not sure on specs, 220 for the crank to be ground,
Worked out to be around 1600 bucks,
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
or you just go to the wreckers and buy another tickford engine you can hear running first. thats what i did. mine was $250
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| jaysway |
|
|||
|
correct ^
low km el engine for an easy conversion |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 77 guests |
