Fordmods Logo

like a sieve 

 

Page 1 of 1 [ 13 posts ] 

 
 Post subject: like a sieve
Posted: Thu Jun 11, 2009 7:03 pm 
Parts Gopher
Offline

Posts: 70

Joined: 4th Aug 2007

Ride: ef manual

Location: Maffra
VIC, Australia

well i changed my oil a couple of weekends ago with the standard 15w40, last night it started leaking at work and left two fairly big puddles, as big a standard size bream haha. i was wondering if the oil could be too thin or i should use non synthetic as im coming up to the 300,000kms mark?
this motor is givin me s**t i tells yas

 

_________________

f***in fords

Top
 Profile  
 
 
 Post subject: Re: like a sieve
Posted: Thu Jun 11, 2009 7:22 pm 
Getting Side Ways
Offline

Posts: 1220

Joined: 11th Nov 2007

Ride: f6 rspec

Location: Sydney
NSW, Australia

shouldn't leak no matter what oil your using, check where the leaks coming from and fix it..hopefully its just the sump plug and not the rear main
Top
 Profile  
 
 
 Post subject: Re: like a sieve
Posted: Thu Jun 11, 2009 9:02 pm 
NSW Cruise Moderator
Offline
User avatar

Age: 46

Posts: 7338

Joined: 5th Nov 2004

Gallery: 12 images

Ride: TE50

Location: ɹǝpun uʍop
NSW, Australia

what filter did you use? i have used a coper filter before and had the same result, ages ago, there was a batch that went out with the incorrect sze seal, cause the seal was too small it didn't seal preoperly and leaked acordingly.

But yeah check your sump plug, and make sure your oil filter is nace and tight, can be easily overlooked.

 

_________________

Image

I have a car.

Top
 Profile  
 
 
 Post subject: Re: like a sieve
Posted: Thu Jun 11, 2009 9:26 pm 
Parts Gopher
Offline

Posts: 70

Joined: 4th Aug 2007

Ride: ef manual

Location: Maffra
VIC, Australia

yeah, i checked the sump plug its tight, the filter is a ryco and tight. i might bite the bullet and do another oil change with another filter brand and give the sump plug a good clean and new seal maybe.
ugh.

 

_________________

f***in fords

Top
 Profile  
 
 
 Post subject: Re: like a sieve
Posted: Thu Jun 11, 2009 10:28 pm 
Getting Side Ways
Offline

Age: 39

Posts: 1112

Joined: 18th Jan 2005

Location: MAFFRA
VIC, Australia

did the old oil filter seal come off with the old filter?sometimes they stay on then theres 2 and will leak.iv never seen a ryco filter leak in my 7 years using them

 

_________________

97 el xr6,5 speed short shifter,sequential scoop,no arial,freshly resprayed,low on 17's,3 inch zorst,stainless hi flo cat,snort stage 3 stainless manifold,garrett t04e,front mount cooler,wolf 3d ecu,seimens 760cc injectors,walbro fuel pump

Top
 Profile  
 
 
 Post subject: Re: like a sieve
Posted: Thu Jun 11, 2009 10:33 pm 
Parts Gopher
Offline

Posts: 70

Joined: 4th Aug 2007

Ride: ef manual

Location: Maffra
VIC, Australia

i dont think so...would it be leaking as bad as it has though....heaps

 

_________________

f***in fords

Top
 Profile  
 
 
 Post subject: Re: like a sieve
Posted: Fri Jun 12, 2009 10:54 am 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

brown-i wrote:
i dont think so...would it be leaking as bad as it has though....heaps


Yes if there are 2 seals (one old and one new) on top of each other, then oil would leak like a b**ch. I think someone on here did that and started the car and lost a litre instantly. My sister's fiance did the same and lost 2L upon start up...

So it could be or couldn't be since you didn't lose any during start up.

Trace back to where the leaking is coming from and you'll know what's happened.

phong =P~

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
 Post subject: Re: like a sieve
Posted: Fri Jun 12, 2009 7:11 pm 
Parts Gopher
Offline

Posts: 70

Joined: 4th Aug 2007

Ride: ef manual

Location: Maffra
VIC, Australia

yeah ill jack it up tomorrow and have a look.the boss loves his oil leaked carpark tell you that much haha.
do the sump plugs usually leak?or could there be some grit in there.

 

_________________

f***in fords

Top
 Profile  
 
 
 Post subject: Re: like a sieve
Posted: Fri Jun 12, 2009 7:52 pm 
NSW Cruise Moderator
Offline
User avatar

Age: 46

Posts: 7338

Joined: 5th Nov 2004

Gallery: 12 images

Ride: TE50

Location: ɹǝpun uʍop
NSW, Australia

no the sump plugs do not usually leak. I'm gonna lead towards it being your oil filter. and either a lack of seal, to many seals or the incorrect seal.

Remember the oil system is pressurised as it will effectivly pump it out as you drive.

 

_________________

Image

I have a car.

Top
 Profile  
 
 
 Post subject: Re: like a sieve
Posted: Fri Jun 12, 2009 9:42 pm 
Parts Gopher
Offline

Posts: 70

Joined: 4th Aug 2007

Ride: ef manual

Location: Maffra
VIC, Australia

hmmm, well i might do an oil change tomorrow and scrub the oil filter seal area and the sump plug. can sumps crack?i dont think ive hit anything lately.anyone have a reconditioned motor they wanna give/install for me haha

 

_________________

f***in fords

Top
 Profile  
 
 
 Post subject: Re: like a sieve
Posted: Fri Jun 12, 2009 10:42 pm 
Stock as a Rock
Offline

Age: 37

Posts: 125

Joined: 12th May 2009

Ride: 1993 eb xr6 falcon

Location: beaufort
VIC, Australia

i wouldnt do another oil change on it unless i knew where the leak was. check the rear main, oil filter, sump plug and sump gasket. give it a degrease take it for a run and it should show where the leak is good luck :)
Top
 Profile  
 
 
 Post subject: Re: like a sieve
Posted: Sun Jun 14, 2009 5:37 pm 
Getting Side Ways
Offline

Age: 39

Posts: 1112

Joined: 18th Jan 2005

Location: MAFFRA
VIC, Australia

does the sump plug still have its washer?

 

_________________

97 el xr6,5 speed short shifter,sequential scoop,no arial,freshly resprayed,low on 17's,3 inch zorst,stainless hi flo cat,snort stage 3 stainless manifold,garrett t04e,front mount cooler,wolf 3d ecu,seimens 760cc injectors,walbro fuel pump

Top
 Profile  
 
 
 Post subject: Re: like a sieve
Posted: Sun Jun 14, 2009 7:18 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

Surely you would figure out where it's leaking from first?
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 13 posts ] 

Who is online

Users browsing this forum: Google Adsense [Bot] and 77 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu Nov 28, 2024 12:35 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names