|
| efbignik |
|
|||
|
xhute0 wrote: I can come over and help.............you drink the beer!
 Seriously if you need a hand let me know fellaif i'm still screaming and yelling after wensday i recon i mite need a hand
_________________ EFBIGNIK 145.9 RWKW Falcon / 16.27 @ 86.72mph (Stock)
|
|||
| Top | |
|||
| efbignik |
|
|||
|
oh and i found out my back shocks are f**k ed so i have to get new ones f**k more money
_________________ EFBIGNIK 145.9 RWKW Falcon / 16.27 @ 86.72mph (Stock)
|
|||
| Top | |
|||
| rushed |
|
|||
|
re the springs he has the right, set up he's on gas.
i have super low fronts/low rears cept mine are king. side ride angle in sig, has a small rake but i think it looks horn. post progress pics 
rushed. |
|||
| Top | |
|||
| efbignik |
|
|||
|
_________________ EFBIGNIK 145.9 RWKW Falcon / 16.27 @ 86.72mph (Stock)
|
|||
| Top | |
|||
| 66 coupe |
|
||
|
efbignik wrote: F**k lock tite on tail sharft bolts
i'll end up cutting the f**k ers off Spray them with carby cleaner, or stuff called 'rostoff' it will break the loctite down. Also you can get them off with a rattle gun and tube socket if you jack the body up and let the diff hang. One bit of advise, if your changing the torque converter, you might as well knock in a new rear engine seal and replace the front seal on the gearbox, saves you doing it all again if it starts leaking in a few weeks. While the box is out, blow the cooler lines out with air, to get all the old oil out of them. It is also safe to turn the box over, on the ground (once the pan is off) to make it easier to replace the filter. Just make sure you remove the old o-ring. |
||
| Top | |
||
| efbignik |
|
|||
|
what i'll be fitting
* 3.45LSD * King springs all round * Camber castor Kit * RPD R spec 3 * Cam Gear * Valve Springs * Hi-Stall * Tranny Service Kit * Front Pump Seal * Extension Housing Seal * Valve Stem Seals * Intake Manifold Gasket * AU Head Gasket * Thermostat Gasket * Head Studs * Rear Main Oil Seal
_________________ EFBIGNIK 145.9 RWKW Falcon / 16.27 @ 86.72mph (Stock)
|
|||
| Top | |
|||
| efbignik |
|
|||
|
Rushed mate thay are kings just kings that have been knocked around abit u know with scuff marks and bits/chunks missing out of the paint
_________________ EFBIGNIK 145.9 RWKW Falcon / 16.27 @ 86.72mph (Stock)
|
|||
| Top | |
|||
| phongus |
|
|||
|
efbignik wrote: im guessing the yellow ones are the king springs low? and the other one is the stock ugly worn out springs? sorry never replaced springs before =(
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| Damo |
|
|||
|
is that a pool of ATF under your car ? looks all to familiar. Good luck with it all, don't go dropping HLA's down oil gallerys
 I found out the hard way how BAD that can be.
|
|||
| Top | |
|||
| efbignik |
|
|||
|
phongus yeah mate you got it
_________________ EFBIGNIK 145.9 RWKW Falcon / 16.27 @ 86.72mph (Stock)
|
|||
| Top | |
|||
| phongus |
|
|||
|
efbignik wrote: phongus yeah mate you got it
sweet....just making sure cause i looked at my super lows and it was a little shorter =D all good.....if u don't mind me asking. is it hard to put the front springs in if u don't have the tools? cause i want to put the springs in myself. the rear is relatively easy but the front ones u need spring compressors? phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| efbignik |
|
|||
|
i'll let you know 2 morrow arvo cuz i'll be having a crack at it with out spring compressors
UPDATE : old diff is out, trannys out, just need to but all new seals in and hi-stall
_________________ EFBIGNIK 145.9 RWKW Falcon / 16.27 @ 86.72mph (Stock)
|
|||
| Top | |
|||
| efbignik |
|
|||
|
ok i'm off for a big day in the back yard office
yaya 2 much work for 1 man
_________________ EFBIGNIK 145.9 RWKW Falcon / 16.27 @ 86.72mph (Stock)
|
|||
| Top | |
|||
| stomper |
|
|||
|
phongus wrote: efbignik wrote: phongus yeah mate you got it sweet....just making sure cause i looked at my super lows and it was a little shorter =D all good.....if u don't mind me asking. is it hard to put the front springs in if u don't have the tools? cause i want to put the springs in myself. the rear is relatively easy but the front ones u need spring compressors? phong =P~ Front springs are very hard to put in if you dont have the tools. You will need things called spring compressors. Basically in the front there is the shock and spring as one part. Pull that out and put 2 spring compressors on. Spring compressors are basically a long thread with a head a the top and 2 hooks that face in. So as you tighten the compressor it tightens the spring. If there is another way of doing it tell me.
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| efbignik |
|
|||
|
2 blokes
1 lean on it 2 the other un do it with a rattle gun just be bloody carefull you don't do it 2 fast or you'll get sprung
_________________ EFBIGNIK 145.9 RWKW Falcon / 16.27 @ 86.72mph (Stock)
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 87 guests |
