|
TJ |
|
||
|
Hey,
Just went to start my car as i was leavin work and no go. Would start to crank over then stop. It only started when i removed the cap off the brake fluid. When it started it was blowing a s**t load of white smoke. It stopped after like 20 mins then the car seemed ok. Got home checked the water and oil seemed ok except for a nice milky white on the inside of the cap. Just tryuing to confirm if my thoughts of a blow head are correct. Cheers TJ |
||
Top | |
madmax |
|
|||
|
If its heaps of smoke like a smokescreen then yes it sounds as though you have either a cracked head or the head gasket has failed. Take your plugs out and look for traces of coolant. When this happened to me #4 cylinder was full to the plug hole with coolant It was also very hard to start.
_________________
|
|||
Top | |
nannas_ed |
|
|||
|
a heap of white smoke and milky s**t on the oil cap are a dead give away for a blown head gasket, when ya get a chance pull the dipstick out and have a look at the oil.
or else clean the cap, top up water/oil levels and monitor it closly.
_________________ |
|||
Top | |
TJ |
|
||
|
Hey,
Thanks for the replies. Yeah i was speaking to a guy i know through work who works at repco and works on heads. He gunna loot at it tomorrow. 300 bucks to remove and re-fit the head and a worst case senario of 495 for a reconditioned head. Then he gunna do me trade prices on the oil and s**t. Once again. thanks for the replies guys and i will let you know what he says tomorrow. Cheers |
||
Top | |
Rick_Deckard |
|
|||
|
Well least you're getting what seems like a good deal. When/if mine goes I know I'll get raped good and well.
_________________ E39 523i |
|||
Top | |
Kit |
|
|||
|
Same here..
|
|||
Top | |
JOSE |
|
|||
|
just did mine, $700 all up.
_________________ Because i can. |
|||
Top | |
Andrew J |
|
|||
|
Ive done mine twice, 1300 dollars first time, free the second. Primarily due to the head cracking and not just being a gasket.
_________________ The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?
|
|||
Top | |
twirqurky |
|
||
|
What the plan now TJ? When is Fey back on the road?
|
||
Top | |
TJ |
|
||
|
Hey
Got my car back today . There was small cracks in 4 of the 6 cylinders. All fixed now and car is running beautiful. All up cos me $740 including oil etc and free lifter kit aparently. So yeah fingers crossed hope i dont have any more problems with it. Both the mechanic and the guy that reconditioned my head recon i should be sweet for a while now atleast. Cheers |
||
Top | |
twirqurky |
|
||
|
Your a bastard for getting it so cheap dude!
|
||
Top | |
rusty_ute |
|
|||
|
I've done 2 myself now on different ea s paks, cost me 350 each time including head repairs......?????? Pretty easy job really. Diid one on me mates xg ute. That cost 400 all up and the head had a couplla good cracks in it.... Thanks to Phil Young Engine Reconditiong, keep up the good work
_________________ mm, unlikely. |
|||
Top | |
TJ |
|
||
|
ooh ok sounds good. Yeah the less i touch under the hood the better i not gunna attemp anythin like that cause i sure i would have alot of parts left over.
|
||
Top | |
smoke_ |
|
|||
|
TJ wrote: Hey
Got my car back today . There was small cracks in 4 of the 6 cylinders. All fixed now and car is running beautiful. All up cos me $740 including oil etc and free lifter kit aparently. So yeah fingers crossed hope i dont have any more problems with it. Both the mechanic and the guy that reconditioned my head recon i should be sweet for a while now atleast. Cheers dude that is a really good price fitted, can't complain with that.
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
Top | |
twirqurky |
|
||
|
TJ wrote: ooh ok sounds good. Yeah the less i touch under the hood the better i not gunna attemp anythin like that cause i sure i would have alot of parts left over.
He he wait til we paint my engine bay then dude, we going to have fun ten! |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 43 guests |