|
EL2XR8 |
|
|||
|
Hi guys,
96 EFII, auto with 217k. it's got a loud tapping noise at any sort of acceleration. Im almost certain that its the sound the exhaust system makes as it starts cooling down after the engine has been switched off. Could it be loose or a blockage? Thanks.
_________________ EL II XR8
|
|||
Top | |
TeKnO |
|
|||
|
well i had a loud knocking noise suddenly come about with my ebii the other week, turned out to be 2 of the 4 bolts on my water pump were half way out, may not be the same as your prob but...
_________________ †={][}= TEKNO ={][}=† |
|||
Top | |
rip_ea |
|
||
|
is it like a rattling noise? does it just occur under acceleration? might be engine knock.
marc |
||
Top | |
sookywawa |
|
||
|
I had the same problem on my 95 EF Fairmont auto and it was loose bolts in the convertor in the gearbox
|
||
Top | |
TeKnO |
|
|||
|
with mine, the noise was there when i accelerated to any speed, was not there at idle.
_________________ †={][}= TEKNO ={][}=† |
|||
Top | |
EL2XR8 |
|
|||
|
I've heard it at idle a few times, but mostly under acceleration.
Wouldn't be internal you think?
_________________ EL II XR8
|
|||
Top | |
TeKnO |
|
|||
|
dunno mate, just have a look at the bolts on the water pump, if there loose, tighten them. if not then have a look at your bolts on the auto converter
_________________ †={][}= TEKNO ={][}=† |
|||
Top | |
mitchg911 |
|
|||
|
it wouldnt happen to just be an exhaust leak?
_________________ BF XR6T 6spd Auto. 60lb injectors, Hybrid Cooler, Custom Piping, Custom Surge Tank, Actuator. |
|||
Top | |
EL2XR8 |
|
|||
|
nah, it's from the engine bay, happens at idle too, higher the revs, louder and faster is the tapping?
_________________ EL II XR8
|
|||
Top | |
mitchg911 |
|
|||
|
the exhaust manifold is in the engine bay,, and will also increase in volume and speed with revs..
but it could also be a colapsed lifter.. lots of things make a tapping noise -mitch
_________________ BF XR6T 6spd Auto. 60lb injectors, Hybrid Cooler, Custom Piping, Custom Surge Tank, Actuator. |
|||
Top | |
krisisdog |
|
|||
|
I've got one which is in my gearbox, manual, which I thought was a lifter to start with. NFI what I'm gunna do to fix it either.
|
|||
Top | |
phongus |
|
|||
|
If the frequency of tapping increases as revs increase, then I would point the finger at the lifters. You can pull the rocker cover off and have a squizz at the lifters to see if any of them are stuck in.
Don't think exhaust would make a tapping noise even a bolt is loose. phong =P~
_________________ phongus = Post whore 2006 |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 74 guests |