Fordmods Logo

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

low power at low revs?? 

 

Page 1 of 1 [ 13 posts ] 

Post New Topic Post Reply  Previous topic Next topic
 
XGsteve
 Post subject: low power at low revs??
Posted: Tue Jul 31, 2007 6:16 pm 
Fordmods Newbie
Offline

Posts: 11

Joined: 14th Aug 2006

Location: Newcastle
NSW, Australia
Hi all, ive just finished putting an AU 4.0l in my XG ute, but it seems to rev slow and realy lack power untill about 2-3 grand then it takes off and revs fine, any ideas on what the hell is goin on?
Top
 Profile  
 
 
Havoc19
Posted: Tue Jul 31, 2007 6:31 pm 
Fordmods Newbie
Offline

Age: 39

Posts: 9

Joined: 6th Jan 2006

Ride: Futura

Location: Adelaide, Sout Australia
SA, Australia
leads and plugs f**k maybe
Top
 Profile  
 
 
XGsteve
Posted: Tue Jul 31, 2007 6:35 pm 
Fordmods Newbie
Offline

Posts: 11

Joined: 14th Aug 2006

Location: Newcastle
NSW, Australia
replaced them both
Top
 Profile  
 
 
ebfairmont3.9
Posted: Tue Jul 31, 2007 6:48 pm 
Fordmods Junkie
Offline
User avatar

Age: 38

Posts: 1175

Joined: 23rd Mar 2005

Gallery: 6 images

Ride: 1994 ED Fairmont

Location: Brisbane
QLD, Australia
Timing.... Sounds like it could be retarded...

Maybe cam timing unlikely though...
Is it a Log style manifold????

 

_________________

1994 ED Fairmont Champaign Gold - AU Series II Intech 4.0L - EL EFI - Thermo Fans - 4.11 LSD - Pacemaker 4480 Into Custom 3" Exhaust - Shift Kit
In Progress: EL 4 Speed Auto- 3000 STALL - To be fitted
EF Tickford Race Spec Head Port- In the shop
Custom SureCam - Chiptorque
Top
 Profile  
 
 
XGsteve
Posted: Tue Jul 31, 2007 6:50 pm 
Fordmods Newbie
Offline

Posts: 11

Joined: 14th Aug 2006

Location: Newcastle
NSW, Australia
Nah its the bbm manifold
Top
 Profile  
 
 
joshannon.7
Posted: Tue Jul 31, 2007 6:52 pm 
Smokin em up
Offline

Age: 42

Posts: 296

Joined: 16th Oct 2006

Ride: 94 EF (OPT20), TF Cortina Ghia

Location: Bendigo
VIC, Australia
what ecu are you running? dunno if it matters just a thought.

 

_________________

"Look I found tape, I'm a mechanic now!!!" Mike Teutul
Top
 Profile  
 
 
XGsteve
Posted: Tue Jul 31, 2007 6:57 pm 
Fordmods Newbie
Offline

Posts: 11

Joined: 14th Aug 2006

Location: Newcastle
NSW, Australia
its an EL ECU, i was told i had to run it with the bbm
Top
 Profile  
 
 
ebfairmont3.9
Posted: Tue Jul 31, 2007 6:59 pm 
Fordmods Junkie
Offline
User avatar

Age: 38

Posts: 1175

Joined: 23rd Mar 2005

Gallery: 6 images

Ride: 1994 ED Fairmont

Location: Brisbane
QLD, Australia
Ahhhh have you plummed the BBM correctly??? If the Manifold is on HIGH rpm mode it will be a bloody pig off the mark. and normal up high.

 

_________________

1994 ED Fairmont Champaign Gold - AU Series II Intech 4.0L - EL EFI - Thermo Fans - 4.11 LSD - Pacemaker 4480 Into Custom 3" Exhaust - Shift Kit
In Progress: EL 4 Speed Auto- 3000 STALL - To be fitted
EF Tickford Race Spec Head Port- In the shop
Custom SureCam - Chiptorque
Top
 Profile  
 
 
XGsteve
Posted: Tue Jul 31, 2007 7:11 pm 
Fordmods Newbie
Offline

Posts: 11

Joined: 14th Aug 2006

Location: Newcastle
NSW, Australia
ill give that a try when i get home and let you know how it goes
Top
 Profile  
 
 
ebfairmont3.9
Posted: Tue Jul 31, 2007 7:23 pm 
Fordmods Junkie
Offline
User avatar

Age: 38

Posts: 1175

Joined: 23rd Mar 2005

Gallery: 6 images

Ride: 1994 ED Fairmont

Location: Brisbane
QLD, Australia
you need to run wires to the ECU to setup the manifold switching...

you will need the solenoid from an EL its behind the wiper washer bottle and you need all the piping to go with.

 

_________________

1994 ED Fairmont Champaign Gold - AU Series II Intech 4.0L - EL EFI - Thermo Fans - 4.11 LSD - Pacemaker 4480 Into Custom 3" Exhaust - Shift Kit
In Progress: EL 4 Speed Auto- 3000 STALL - To be fitted
EF Tickford Race Spec Head Port- In the shop
Custom SureCam - Chiptorque
Top
 Profile  
 
 
XGsteve
Posted: Wed Aug 01, 2007 5:10 pm 
Fordmods Newbie
Offline

Posts: 11

Joined: 14th Aug 2006

Location: Newcastle
NSW, Australia
yeah i got the solenoide there and it seems to be switching the manifold open fine
Top
 Profile  
 
 
XGsteve
Posted: Fri Aug 03, 2007 5:06 pm 
Fordmods Newbie
Offline

Posts: 11

Joined: 14th Aug 2006

Location: Newcastle
NSW, Australia
hey guys my utes still playin up anybody got any ideas?
Top
 Profile  
 
 
XGsteve
Posted: Fri Aug 24, 2007 8:26 pm 
Fordmods Newbie
Offline

Posts: 11

Joined: 14th Aug 2006

Location: Newcastle
NSW, Australia
any ideas???? ive tryd disconecting bbm but still does the same, ived tryd running the old xg ecu but still the same, any suggestions would be great
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 1 of 1  [ 13 posts ] 
Jump to:  

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Who is online

Users browsing this forum: No registered users and 46 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu Nov 28, 2024 7:28 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names