|
| MadMatt |
|
|||
|
SWC wrote: MadMatt wrote: Shifteh wrote: is there much diff in au and ef blocks, might just get au block The EF timing cover and sump will fit the AU block for a straight fit. Or mod the front of the AU sump to clear the k frame. EF/EL Sump 'WILL NOT FIT AU ENGINE'. Why do you think people pay $120 plus to have a sump modified of modify their K Fame to fit an AU Engine to their EF/EL's if an EF/EL sump would fit. AU sump won't fit and that means that the Timing Case won't fit either. I have seen it done. You have to change the timing cover to make it fit.
_________________ Member Number 8804 |
|||
| Top | |
|||
| Shifteh |
|
||
|
@ mad matt, so i can get an au block, ef sump , and which timing cover to make it all fitt, Do you have photoes
_________________ Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue |
||
| Top | |
||
| MadMatt |
|
|||
|
I dont know if he has pics but I will try to get more details for you.
_________________ Member Number 8804 |
|||
| Top | |
|||
| Shifteh |
|
||
|
sweet
_________________ Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue |
||
| Top | |
||
| TROYMAN |
|
||
|
MadMatt wrote: SWC wrote: MadMatt wrote: Shifteh wrote: is there much diff in au and ef blocks, might just get au block The EF timing cover and sump will fit the AU block for a straight fit. Or mod the front of the AU sump to clear the k frame. EF/EL Sump 'WILL NOT FIT AU ENGINE'. Why do you think people pay $120 plus to have a sump modified of modify their K Fame to fit an AU Engine to their EF/EL's if an EF/EL sump would fit. AU sump won't fit and that means that the Timing Case won't fit either. I have seen it done. You have to change the timing cover to make it fit. and i beleave you also need to change the rear main cap to get clearence for the sump.. |
||
| Top | |
||
| Shifteh |
|
||
|
arrrrg
_________________ Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue |
||
| Top | |
||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
TROYMAN wrote: MadMatt wrote: SWC wrote: MadMatt wrote: Shifteh wrote: is there much diff in au and ef blocks, might just get au block The EF timing cover and sump will fit the AU block for a straight fit. Or mod the front of the AU sump to clear the k frame. EF/EL Sump 'WILL NOT FIT AU ENGINE'. Why do you think people pay $120 plus to have a sump modified of modify their K Fame to fit an AU Engine to their EF/EL's if an EF/EL sump would fit. AU sump won't fit and that means that the Timing Case won't fit either. I have seen it done. You have to change the timing cover to make it fit. and i beleave you also need to change the rear main cap to get clearence for the sump.. Changing a main cap would mean line honing the main tunnel. change the bolts and massage the sump with a hammer |
||
| Top | |
||
| Shifteh |
|
||
|
i might have an ef block on way , just swap the pistons and crack over , new rings , bearings and julies your brother
_________________ Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue |
||
| Top | |
||
| Shifteh |
|
||
|
i might have an ef block on way , just swap the pistons and crack over , new rings , bearings and julies your brother
_________________ Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue |
||
| Top | |
||
| Shifteh |
|
||
|
i might have an ef block on way , just swap the pistons and crack over , new rings , bearings and julies your brother
_________________ Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue |
||
| Top | |
||
| hans hartman |
|
||
|
Shifteh wrote: i might have an ef block on way , just swap the pistons and crack over , new rings , bearings and julies your brother depends on bore size-to piston fit,rebore the block to fit pistons,or buy new pistons to fit bore,or if lucky just new rings,check the au shaft hole first 
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| Shifteh |
|
||
|
i mean ef-ef i cant really sbe stuffed with an au block atm , but as soon as the ef block comes ill chuck it all in the ef, then i may get an ba engine and put that in
_________________ Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue |
||
| Top | |
||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
just buy a complete engine.
buying a block and changing over your internals is guaranteed to end in heart ache. |
||
| Top | |
||
| cjh |
|
|||
|
Shifteh wrote: i took the timing chain and gear off today to clean it upo and i noticed theres some slack in the timing chain idler gear, it moves say 2-3mm from side to side but does not have any slack up and down,,, im pretty sure this connects to the dizzy and oil pump Should i be worried, or do a shell be right Sounds like its had a head gasket job once, and the cam chain tensioner wasn't reset.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Shifteh |
|
||
|
well funney you say that, when i was taking harmonic balancer bolt off it was ,,,, say surprisingley loose i mean i undid it with an X type tyre iron thingy,,,, and the return for the turbo's oil is like a hose with a fitting gasket gooed into sump so i guess someone did a dodge job,,
anyone needing a large useless peice of cast iron????? actually i might make a table or something
_________________ Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 110 guests |
