|
| Nicko |
|
|||
|
waverunner wrote: xr8 dismantler
I have given you my credit card number etc is my one (EL RED) secured yet. If so it is on it's way Regards Troy Hi Troy are you after ef or el?
_________________ Nicko |
|||
| Top | |
|||
| Nicko |
|
|||
|
chunkz wrote: chunkz/ what ever is there nick... (darren already knows.. wensdy is pay day, so cya then
and dont be telling me the shop is shut, else i'll f**k key ya car  i thought you were more experienced at ripping off mirrors than keying cars or maybe you might put my alloys on the wrong way!
_________________ Nicko |
|||
| Top | |
|||
| Kit |
|
|||
|
I turned my intake into an EL. I replaced the long EF intake rocker cover bolts with small ones. So I have an intake runner to T. body from an EL. Does this mean that with my new intake I have to put my EF bolts back on?
|
|||
| Top | |
|||
| Nicko |
|
|||
|
hi Kit
i believe you will have to put one of your ef bolts back on
_________________ Nicko |
|||
| Top | |
|||
| wally's XR |
|
||
|
Just a note...Some EL owners will also need some 75mm hose to connect the intake to the throttle body.
Melbourne people: Try Purple Pig, they have hose to suit. After all that, it's worth it. I'll post up a pic hopefully by tomorrow night
_________________ Silver, Full Tickford body kit V8 grunt! |
||
| Top | |
||
| chunkz |
|
|||
|
Neo_nick wrote: chunkz wrote: chunkz/ what ever is there nick... (darren already knows.. wensdy is pay day, so cya then and dont be telling me the shop is shut, else i'll f**k key ya car i thought you were more experienced at ripping off mirrors than keying cars or maybe you might put my alloys on the wrong way! why would i do that, i got em right C*** also, i can do both if ya want
_________________
|
|||
| Top | |
|||
| waverunner |
|
|||
|
Sorry Nick for the confusion EF for sure. If reds not available what is available
|
|||
| Top | |
|||
| jimxr6 |
|
||
|
Its arrived and fitted ye yah
For all those people that have an AU please take note there are a few problems you should be aware of i. mounting holes on the TB pipe do not line up, I had to drill them bigger 2. the air box pipe bolt hole is out but after loosing the airbox and with some force it fits. 3. the TB pipe hits the bonnet in an unacceptable manner. I think I will be able to fix this prblem by bending the mounting brackets upward which should lower the intake pipe sufficiently. 4. to fit the intake pipe to the trottle body you will need two 80mm clamps and a 5cm length of 75mm inside diametre flexable pipe. Question ? has any body else had this problem or am I just unlucky The intake looks pretty cool and I hope it makes a small difference as a bonus. Thanks for taking the time to manufacture these intakes , its appreciated. 
|
||
| Top | |
||
| wally's XR |
|
||
|
jimxr6 wrote: Its arrived and fitted ye yah
4. to fit the intake pipe to the trottle body you will need two 80mm clamps and a 5cm length of 75mm inside diametre flexable pipe. Question ? has any body else had this problem or am I just unlucky The intake looks pretty cool and I hope it makes a small difference as a bonus. Thanks for taking the time to manufacture these intakes , its appreciated. jimxr6 Your not the only one with small problems. I too had small problems but the end result is a great reward for all concerned with this topic. Thanks again to the boys at FTG
_________________ Silver, Full Tickford body kit V8 grunt! |
||
| Top | |
||
| janek |
|
||
Posts: 413 Joined: 14th Nov 2004 Ride: 2000 AU II Fairmont Ghia Location: Brisbane Most of the time/Sydney Some of the time |
jimxr6 wrote: Its arrived and fitted ye yah
For all those people that have an AU please take note there are a few problems you should be aware of i. mounting holes on the TB pipe do not line up, I had to drill them bigger 2. the air box pipe bolt hole is out but after loosing the airbox and with some force it fits. 3. the TB pipe hits the bonnet in an unacceptable manner. I think I will be able to fix this prblem by bending the mounting brackets upward which should lower the intake pipe sufficiently. 4. to fit the intake pipe to the trottle body you will need two 80mm clamps and a 5cm length of 75mm inside diametre flexable pipe. Question ? has any body else had this problem or am I just unlucky The intake looks pretty cool and I hope it makes a small difference as a bonus. Thanks for taking the time to manufacture these intakes , its appreciated. au1 or 2/3? the au1 had basically an el motor, so it will most definately be different than the au2 one. speaking of which, were the au1 vs au2/3 differences noted upon ordering/manufacturing?
_________________ Organza 2000 AU 2 Fairmont Ghia
|
||
| Top | |
||
| Kit |
|
|||
|
jimxr6 wrote: Its arrived and fitted ye yah
For all those people that have an AU please take note there are a few problems you should be aware of i. mounting holes on the TB pipe do not line up, I had to drill them bigger 2. the air box pipe bolt hole is out but after loosing the airbox and with some force it fits. 3. the TB pipe hits the bonnet in an unacceptable manner. I think I will be able to fix this prblem by bending the mounting brackets upward which should lower the intake pipe sufficiently. 4. to fit the intake pipe to the trottle body you will need two 80mm clamps and a 5cm length of 75mm inside diametre flexable pipe. Question ? has any body else had this problem or am I just unlucky The intake looks pretty cool and I hope it makes a small difference as a bonus. Thanks for taking the time to manufacture these intakes , its appreciated. My existing rubber elbow hose to the TB should go on alright shouldn't it? |
|||
| Top | |
|||
| ammo |
|
||
|
i want one of those mandral bent intkes HOW do i get one
|
||
| Top | |
||
| biomechanic |
|
||
|
jimxr6 wrote: The intake looks pretty cool and I hope it makes a small difference as a bonus.
Thanks for taking the time to manufacture these intakes , its appreciated. Have you noticed any difference in performance? Any difference in sound? |
||
| Top | |
||
| NFSpeed |
|
|||
|
if anyone is interested in taking my place, they are more than welcome to do so (could use the cash that's all).. please be aware i have already paid for a Black/EF so u can't change nothin...
_________________ HSV Herpes Simplex Virus
|
|||
| Top | |
|||
| AU-MUSTD |
|
|||
|
Had big dramas fitting mine today with hitting the bonnet. Nothing tin snips wont fix but looks a treat. Check out my gallery for pics.
_________________ Now with a hint of "BLING" |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 43 guests |
