|
| ScottFiske |
|
|||
|
Good Work, any news on when the silver ones are coming ?
_________________ The Lion Tamer |
|||
| Top | |
|||
| Kit |
|
|||
|
Kit wrote: jimxr6 wrote: Its arrived and fitted ye yah  For all those people that have an AU please take note there are a few problems you should be aware of i. mounting holes on the TB pipe do not line up, I had to drill them bigger 2. the air box pipe bolt hole is out but after loosing the airbox and with some force it fits. 3. the TB pipe hits the bonnet in an unacceptable manner. I think I will be able to fix this prblem by bending the mounting brackets upward which should lower the intake pipe sufficiently. 4. to fit the intake pipe to the trottle body you will need two 80mm clamps and a 5cm length of 75mm inside diametre flexable pipe. Question ? has any body else had this problem or am I just unlucky The intake looks pretty cool and I hope it makes a small difference as a bonus. Thanks for taking the time to manufacture these intakes , its appreciated.  My existing rubber elbow hose to the TB should go on alright shouldn't it? Scratch that 
|
|||
| Top | |
|||
| xr8 dismantler |
|
|||
|
ScottFiske wrote: Good Work, any news on when the silver ones are coming ?
shouldnt be to long now . seems there is a few little mods to be done. but doesnt seem to be a big problem keep posting up what mods youve done as you fit them it will make it easier for chunkz when he fits his 
|
|||
| Top | |
|||
| janek |
|
||
Posts: 413 Joined: 14th Nov 2004 Ride: 2000 AU II Fairmont Ghia Location: Brisbane Most of the time/Sydney Some of the time |
im starting to get concerned now...
werent they different designs, and the reason we specified each model? as well as actually getting them made up (to FIT)... $215 is a hell of a lot of dough for me, i just want to make sure i dont get bodgied...
_________________ Organza 2000 AU 2 Fairmont Ghia
|
||
| Top | |
||
| AU-MUSTD |
|
|||
|
The only extra cost will be a 3 inch sleeve and two clamps to connet the intake to your throttle body which cost $15 from autobarn. Make sure it's not hitting your bonnet 100% before your test drive it as mines now got scratches on it
_________________ Now with a hint of "BLING" |
|||
| Top | |
|||
| Nicko |
|
|||
|
janek wrote: im starting to get concerned now...
werent they different designs, and the reason we specified each model? as well as actually getting them made up (to FIT)... $215 is a hell of a lot of dough for me, i just want to make sure i dont get bodgied... Hi Janek, We have contracted a vendor to make these, FTG has made no money of this project and Darren has gone out of his way to get these done to give something back to the members that have supported us. I have several members on standby that are definently wanting one (silver au/el) - so if you would like to pull out now with a full refund now you may do so. However once the item is dispatched we cannot offer a refund
_________________ Nicko |
|||
| Top | |
|||
| ScottFiske |
|
|||
|
Shame i dont need 2
_________________ The Lion Tamer |
|||
| Top | |
|||
| Nicko |
|
|||
|
ScottFiske wrote: Shame i dont need 2
still waiting for the rest to arrive
_________________ Nicko |
|||
| Top | |
|||
| wally's XR |
|
||
|
For EL owners note:
Throttle body opening is an OVAL shape measuring 85mm at its largest point. Autobarn have nothing for us EL owners. Try Purple Pig! Cheers, wally's XR
_________________ Silver, Full Tickford body kit V8 grunt! |
||
| Top | |
||
| Nicko |
|
|||
|
thanks for the Pointer Brett
ill update first post
_________________ Nicko |
|||
| Top | |
|||
| chunkz |
|
|||
|
okay this is gunna suck
im already disadvantaged by no knowledge but what you guys been saying, i think im going to fooked installing this thing edit: are these things effective on stock cars or you need extractors n exhaust or what?
_________________
|
|||
| Top | |
|||
| jimxr6 |
|
||
|
I have a few more suggestions regarding the fitment of the intake.
Mine is fitted now and sitting fine, after the following mods and unfortunately it got scratched from hitting the bonnet.
Drilled out the mounting holes to 10mm Bent mounting brackets upwards about 10-15mm, this has lowered the intake enough so it doesnt hit the bonnet. Be warned bending the brackets will cause the paint to crack I had to loosen the airbox mounting bolts to prevent the box/lid from cracking under the stress of being connected to the new intake pipe that doesnt fit quiet correctly. Another thing I have noticed is that the trottle/cruise control cables are hard up against the intake, I hope they dont wear through. After these few mods the intake looks good and I am happy, now its fitted correctely. |
||
| Top | |
||
| Bug |
|
|||
|
Hey Nick, Just wondering if youve determined wether theres a pipe available for me yet
Cheers.
_________________ EL XR6 5spd |
|||
| Top | |
|||
| NFSpeed |
|
|||
|
if anyone is interested in taking my place, they are more than welcome to do so (could use the cash that's all).. please be aware i have already paid for a Black/EF so u can't change nothin...
_________________ HSV Herpes Simplex Virus
|
|||
| Top | |
|||
| Bug |
|
|||
|
mememememe!!
Black/EF is exactly what I want..
_________________ EL XR6 5spd |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 56 guests |
