Fordmods Logo

modding an exhaust- popping and gargle 

 

Page 2 of 2 [ 28 posts ] Go to page Previous  1, 2

 
 Post subject: Re: modding an exhaust- popping and gargle
Posted: Mon May 04, 2009 1:29 am 
Smokin em up
Offline

Age: 45

Posts: 223

Joined: 9th Feb 2009

Gallery: 3 images

Ride: AU VCT,68 LANE,84 COURIER,

Location: brisbane
QLD, Australia

maybe with the throttle open to much the air fuel goes wacko computer adjust it,and then you get that gurgle and crackle,just a thought,also keeping your engine cool and having a good cold air intake helps with those kinda noises (or back fires) :D

 

_________________

YOU CAN LIVE IN A CAR BUT YOU CANT DRIVE A HOUSE

Top
 Profile  
 
 
 Post subject: Re: modding an exhaust- popping and gargle
Posted: Mon May 04, 2009 10:13 am 
Getting Side Ways
Offline

Posts: 534

Joined: 14th Oct 2007

Gallery: 8 images

Location: newcastle
NSW, Australia

mine is an ghia auto, cheap extractors,cat 2 1/2 zorst, large redback muff and rear bar hot dog.
idleing down in third sounds nice with the windows down ..
with the hot dog section off and dumped at the diff it would get smooth grumbles with a pff pff pff but the drone and letter from the epa will make you change it back.
lumpy cam with extractors or standard with large cat back or twin system
should give you the grumpyness you desire
:)
Top
 Profile  
 
 
 Post subject: Re: modding an exhaust- popping and gargle
Posted: Mon May 04, 2009 10:14 am 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia

ive temporarly fitted a std ecu instead of the xr6 one using the 300kpa fuel reg, and mine has started the popping on decelleration..also is running fairly rich at idle.
i think its the over fueling part that causes the popping
aswell as the straight through muffler with no resinator..
Top
 Profile  
 
 
 Post subject: Re: modding an exhaust- popping and gargle
Posted: Mon May 04, 2009 1:18 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 2517

Joined: 27th Mar 2006

Gallery: 1 images

Ride: FG MkII Xr6t Ute

Location: Brisbane
QLD, Australia

TROYMAN wrote:
i think its the over fueling part that causes the popping


This is the most common cause. As for the burble, you can still get that with a cat; it may sound better without a cat (although never tried due to ridiculous fines and sound not being the main priority). Any cam with decent duration will give give you close to the sound you're after.

 

_________________

EVL098 wrote:
Cramping in the hand from having it on your Wang for an excessive period of time is a definate con.
Seriously do people google "f**k up modifications for Fords owned by Jews" and get linked straight to this site nowadays?

AU,factory fitted tickford kit/IRS, t5,Sports ryder/KYB: gone.

Top
 Profile  
 
 
 Post subject: Re: modding an exhaust- popping and gargle
Posted: Mon May 04, 2009 1:59 pm 
Tyre Shredder
Offline
User avatar

Age: 36

Posts: 308

Joined: 9th Apr 2006

Gallery: 5 images

Ride: R33

Power: 142 rwkw

Location: Pennant Hills, Sydney
NSW, Australia

easy way of doing this is just a redback catback and remove all mufflers.. that with standard headers and cat will guarantee burbling and huge amounts of gargling.. trust me lol
its also realllllllllllllllllllly loud, expect alot of stares if u let off throttle at high rpm lol, spits pops and gargles all the way back down lol

 

_________________

R33 GTS-T - 222.6rwkw
EF - 142rwkw

Top
 Profile  
 
 
 Post subject: Re: modding an exhaust- popping and gargle
Posted: Mon May 04, 2009 2:22 pm 
Getting Side Ways
Offline

Posts: 6113

Joined: 8th May 2007

its not really a nice sound at all though.....

theres a VT commodore where i live that has massive amounts of popping & f@rt as it slows down and imo opinion sounds like the motor is sick

a few clapped out old XD's ive seen emit the same noise, its not something i would aim for :)
Top
 Profile  
 
 
 Post subject: Re: modding an exhaust- popping and gargle
Posted: Mon May 04, 2009 5:06 pm 
Stock as a Rock
Offline

Age: 35

Posts: 190

Joined: 25th Oct 2008

Ride: DC LTD V8

Location: melbourne
VIC, Australia

The best way to do this would be to get a v8.

pretty darn simple.

 

_________________

DC LTD V8 pure style

Top
 Profile  
 
 
 Post subject: Re: modding an exhaust- popping and gargle
Posted: Mon May 04, 2009 5:48 pm 
Getting Side Ways
Offline

Posts: 5503

Joined: 20th May 2005

Gallery: 11 images

Ride: EB1 Fairmont Ghia T5 Wagon

Location: Seven Hills, Sydney
NSW, Australia

Mine burbles when on LPG, but doesn't do it on petrol. I don't think changing the exhaust is going to do all that much.

I have Pacies, high flow cat, and 2.5" redback with rear res.

BenJ

 

_________________

BenJ's EB T5 DOHC Ghia Wagon - Current Ride
BenJ's EB GL Sedan - Previous Ride
My respect and thanks go to - snap0964, Paulmac, SWC and MRE-50L

Top
 Profile  
 
 
 Post subject: Re: modding an exhaust- popping and gargle
Posted: Mon May 04, 2009 6:34 pm 
Fordmods Addict
Offline
User avatar

Age: 38

Posts: 7958

Joined: 1st Jun 2005

Gallery: 13 images

Ride: Falcon

Power: 237 rwkw

Location: Melbourne
VIC, Australia

It's 100% caused by unburnt fuel combusting in the exhaust/extractors.
It probably happens when people do extractors exhaust because of the moved HEGO reading leaner AFRs and the ECU richening it up.

 

_________________

ED XR8 Sprint - S-Trim, V500, 249rwkw
BF MKII F6 Tornado - 237rwkw

Top
 Profile  
 
 
 Post subject: Re: modding an exhaust- popping and gargle
Posted: Mon May 04, 2009 6:40 pm 
Getting Side Ways
Offline

Posts: 5503

Joined: 20th May 2005

Gallery: 11 images

Ride: EB1 Fairmont Ghia T5 Wagon

Location: Seven Hills, Sydney
NSW, Australia

I really don't think there is a straight forward answer here.

My Sedan had a nicer overun note with the stock manifold. It went away when I fitted the extractors. Soo many variables. Hell, even changing the octane rating of the fuel you use could change it all.

BenJ

 

_________________

BenJ's EB T5 DOHC Ghia Wagon - Current Ride
BenJ's EB GL Sedan - Previous Ride
My respect and thanks go to - snap0964, Paulmac, SWC and MRE-50L

Top
 Profile  
 
 
 Post subject: Re: modding an exhaust- popping and gargle
Posted: Mon May 04, 2009 7:54 pm 
Site Admin
Offline
User avatar

Age: 41

Posts: 8833

Joined: 18th Dec 2002

Gallery: 6 images

Ride: AUII V8 LTD

Power: 270 rwkw

Location: Sydney
NSW, Australia

A lean mixture on decel will cause it, as will too little timing on decel. Been there and proved it while road tuning a 4L :)

 

_________________

WAG363: AUII LTD Supercharged 363 Dart Stroker [Supercharged 363 LTD Build]
WAGGIN: 2012 Volkswagen Passat Wagon - V6 4Motion.

Top
 Profile  
 
 
 Post subject: Re: modding an exhaust- popping and gargle
Posted: Mon May 04, 2009 7:58 pm 
Getting Side Ways
Offline

Posts: 1220

Joined: 11th Nov 2007

Ride: f6 rspec

Location: Sydney
NSW, Australia

the car is manual, running a tickford ecu with j3 chip..and when downshifting to a stop it just purrrs down to idle with no burble or pops at all..so i guess it must be the fuel mixtures..

its a full aftermarket exhaust..I heard a green eb with exhaust do it yesterday and it sounded pretty good, should of asked what system he had (actually i think his a member on here (green eb, white bars?)
Top
 Profile  
 
 
 Post subject: Re: modding an exhaust- popping and gargle
Posted: Thu May 07, 2009 6:18 am 
Stock as a Rock
Offline
User avatar

Age: 33

Posts: 135

Joined: 31st Oct 2008

Gallery: 5 images

Ride: EA Falcon S pack now 4.0l

Location: Tweed Heads
NSW, Australia

KWIKXR wrote:
I dunno about everyone else, but i reckon without the cat converter in the system the exhaust seems to 'pop' on heavy deceleration or when returning to idle after you rev it in neutral. My EF has no cat as theres no law to say you need one in NZ well not for older cars anyway. My one seems to pop now and then when returning to idle if i rev it a bit. Being auto though it doesnt do it on deceleration except for when i have to use the gears to slow down

Only downside is that its illegal in Aussy to have no cat. Dunno if this would work to the same effect but you could try taking out the rear muffler and just run the centre one?


This is tru my exhaust has come loose at the flange from cat to pipe and its pretty much straight throw extractors and out of cat and I have servere poping.



And yes no cat will make the gargle and poping v8 supercars would have no cat probably no box either I wouldn't no which would make that backfire pop and go crazy.

 

_________________

1990 ea ford falcon getting ready for boost.

2000 Ford Courier 2.5l Turbo Diesel

YZ250 2009

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 2 of 2  [ 28 posts ]  Go to page Previous  1, 2

Who is online

Users browsing this forum: No registered users and 114 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Nov 27, 2024 11:43 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names