|
| Steady ED |
|
|||
|
Oran park, as mentioned above. Dunno what circuit.
haha if I was doing this challenge I would get something like an S13.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| skidder |
|
|||
|
Yep, I would upgrade brakes, and not just a s**t rotor change.
Springs/swaybars/shocks and then tyres depending on money. Pull every last bit of crap out of it.
_________________ EVL098 wrote: Cramping in the hand from having it on your Wang for an excessive period of time is a definate con. Seriously do people google "f**k up modifications for Fords owned by Jews" and get linked straight to this site nowadays? AU,factory fitted tickford kit/IRS, t5,Sports ryder/KYB: gone. |
|||
| Top | |
|||
| skidder |
|
|||
|
Yep, I would upgrade brakes, and not just a s**t rotor change.
Springs/swaybars/shocks and then tyres depending on money. Pull every last bit of crap out of it.
_________________ EVL098 wrote: Cramping in the hand from having it on your Wang for an excessive period of time is a definate con. Seriously do people google "f**k up modifications for Fords owned by Jews" and get linked straight to this site nowadays? AU,factory fitted tickford kit/IRS, t5,Sports ryder/KYB: gone. |
|||
| Top | |
|||
| Grimketel |
|
|||
|
what do you reckon a neat good nick s13 would go for?
the only one i found on carsales was an s14 with work done to it for 14k http://www.carsales.com.au/all-cars/pri ... 13&trecs=1 my brother and I were going to organise between our mates a race championship with a maximum purchase budget of $500 each to race around in paddocks  problem was we couldnt find anyone willing to let us use their paddocks, for fear we would get hurt and then sue them.sign of the times.
_________________ enough isn't enough |
|||
| Top | |
|||
| ebxr82nv |
|
||
|
That s14 doesn't look to bad, it's had the dollars spent in the right places.
_________________ 9/98 AU1 XR6hp-about to retire from the road and be reborn on the race track. |
||
| Top | |
||
| efmarek |
|
||
|
KWIKXR wrote: Well if they didnt spend so much on the car id get a Raptor blower kit, and a set of good extractors. Forget about the cat and exhuast, just dump it at the extractors  And lose power...
_________________ LUMPY-6 |
||
| Top | |
||
| skidder |
|
|||
|
why?
_________________ EVL098 wrote: Cramping in the hand from having it on your Wang for an excessive period of time is a definate con. Seriously do people google "f**k up modifications for Fords owned by Jews" and get linked straight to this site nowadays? AU,factory fitted tickford kit/IRS, t5,Sports ryder/KYB: gone. |
|||
| Top | |
|||
| efmarek |
|
||
|
skidder wrote: why? coz Physics says so.
_________________ LUMPY-6 |
||
| Top | |
||
| skidder |
|
|||
|
physics says it will lose torque downlow, considering this is probably going to be used for peak torque above 3000rpm and the guy suggested using a blower I'm pretty sure it would be more beneficial with only headers...
If you chucked a straight through pipe on there without a cat, however, it might prove more beneficial, but you would need to figure out the right length/diameter.
_________________ EVL098 wrote: Cramping in the hand from having it on your Wang for an excessive period of time is a definate con. Seriously do people google "f**k up modifications for Fords owned by Jews" and get linked straight to this site nowadays? AU,factory fitted tickford kit/IRS, t5,Sports ryder/KYB: gone. |
|||
| Top | |
|||
| ebxr82nv |
|
||
|
3 inch straight through dumped at the diff or exiting the body in front of the back wheels
_________________ 9/98 AU1 XR6hp-about to retire from the road and be reborn on the race track. |
||
| Top | |
||
| KWIKXR |
|
|||
|
efmarek wrote: KWIKXR wrote: Well if they didnt spend so much on the car id get a Raptor blower kit, and a set of good extractors. Forget about the cat and exhuast, just dump it at the extractors And lose power... skidder wrote: physics says it will lose torque downlow, considering this is probably going to be used for peak torque above 3000rpm and the guy suggested using a blower I'm pretty sure it would be more beneficial with only headers... Purely what i was getting at when i said dump it after the extractors  . Doesnt have to be dumped right after the extractors, just get a length of 2.5"-3" pipe and weld it on to lengthen it. My guess is without a full length exhaust it would lose torque downlow for sure, but being a purpose built track car how often would you be revving the thing below 2500rpm as skidder said?Besides with a pretty small budget of $3500 to better the car who would bother with spending extra for a full length exhaust when it probably wouldnt make stuff all difference to lap times? If i was doing this little challenge myself, personally i wouldnt spend the money on the blower, it would go more towards suspension and brakes as most people would do with just basic engine mods to get it breathing better. I just wanna see someone fit the Raptor blower and haul it round a track for 30 laps 
|
|||
| Top | |
|||
| skidder |
|
|||
|
meh, they are f**k anyway. If they had bought a stock el for 2grand they might have a chance, but as is they won't have much money left after the brake upgrade which will be necessary if they want more than a few laps out of it.
_________________ EVL098 wrote: Cramping in the hand from having it on your Wang for an excessive period of time is a definate con. Seriously do people google "f**k up modifications for Fords owned by Jews" and get linked straight to this site nowadays? AU,factory fitted tickford kit/IRS, t5,Sports ryder/KYB: gone. |
|||
| Top | |
|||
| KWIKXR |
|
|||
|
Basically this challenge was a fail as soon as they spent $6500 on the car with a $10000 budget
It will be interesting to see what becomes of this EF XR6 though 
|
|||
| Top | |
|||
| krisisdog |
|
|||
|
Yeh, theyre pretty fuked already with that much spent on the car itself.
An EB XR6 or S pac manual may have been a better bet, and at 1500 or less much better on the budget. Could have afforded the big brake upgrade (1k off ebay), as well as forced induction we'll say $4k and a 50mm radiator (bout 500) + thermos. Then you've still got plenty for springs, shocks, swaybars, 16/17s with semi slicks. Even EF XR6s can be had pretty easy for about $4k......
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 143 guests |
