Fordmods Logo

My 95 EF idles rough 

 

Page 1 of 2 [ 21 posts ] Go to page 1, 2  Next

 
 Post subject: My 95 EF idles rough
Posted: Tue Jan 18, 2005 11:34 pm 
Oompa Loompa
Offline

Posts: 22

Joined: 7th Dec 2004

Ride: 95 EF Falcon

Location: adelaide
SA, Australia

My Ef feels like it is missing (But i dont think it is) when it is idle. It has been in and had a full service and tune. (ULTRA TUNE) they told me all Ef's run a bit rough! @##@ #@##@. It has new plugs + $130 worth of leads. Just had it put on LPG. problem seems to be more noticable since on LPG. Any one got any ideas?
Top
 Profile  
 
 
Posted: Tue Jan 18, 2005 11:53 pm 
Getting Side Ways
Offline
User avatar

Age: 59

Posts: 4370

Joined: 5th Nov 2004

Ride: BA Fairlane Ghia

Location: Karratha
WA, Australia

Did their service include cleaning the ISC? all falcons run a bit rough, what a mob of f**k, hard to find a decent mechanic, no wonder i do this s**t myself.
Top
 Profile  
 
 
Posted: Tue Jan 18, 2005 11:59 pm 
Getting Side Ways
Offline
User avatar

Age: 61

Posts: 4102

Joined: 18th Nov 2004

Gallery: 10 images

Ride: PX2 Ranger 4x4 XLT Dual CAB

Location: Carrum Downs
VIC, Australia

This is a very common problem, I had this very same problem 18 months ago. Try this

Remove and check the resistance on each lead they should be less than 20,000 Ohms.

If it only occurs when running on petrol. Remove each injector and have them professionally cleaned (about $20ea)

With engine running spray some aerostart or similar around manifold gasket, if idle increases than a leak is indicated.

Check all vacuum hoses for leaks

Do each item above at differant times so you can find out the true cause.

Finally after all this my fix was to run the car on premium fuel for about 3 months!

 

_________________

Image
She's meanness put to music and the b**ch is born to run!
Like the sign says, "speed's just a question of money. How fast can you go?"

Top
 Profile  
 
 
Posted: Wed Jan 19, 2005 12:02 am 
Oompa Loompa
Offline

Posts: 22

Joined: 7th Dec 2004

Ride: 95 EF Falcon

Location: adelaide
SA, Australia

ISC?
Top
 Profile  
 
 
Posted: Wed Jan 19, 2005 12:26 am 
Getting Side Ways
Offline
User avatar

Age: 61

Posts: 4102

Joined: 18th Nov 2004

Gallery: 10 images

Ride: PX2 Ranger 4x4 XLT Dual CAB

Location: Carrum Downs
VIC, Australia

shanker1974 wrote:
ISC?


Idle Speed Control.......... mounted on top of throttle body

 

_________________

Image
She's meanness put to music and the b**ch is born to run!
Like the sign says, "speed's just a question of money. How fast can you go?"

Top
 Profile  
 
 
Posted: Wed Jan 19, 2005 12:29 am 
Oompa Loompa
Offline

Posts: 22

Joined: 7th Dec 2004

Ride: 95 EF Falcon

Location: adelaide
SA, Australia

according to their vehicle service report YES!
Top
 Profile  
 
 
Posted: Wed Jan 19, 2005 12:44 am 
Getting Side Ways
Offline
User avatar

Age: 59

Posts: 4370

Joined: 5th Nov 2004

Ride: BA Fairlane Ghia

Location: Karratha
WA, Australia

shanker1974 wrote:
according to their vehicle service report YES!
Wouldnt trust those pricks, pull it off, 2 10mm bolts IIRC,or 2 screws, and have a look, it should be shiny if they have cleaned it, black if they havent, takes 5 mins.
Top
 Profile  
 
 
Posted: Wed Jan 19, 2005 12:46 am 
Oompa Loompa
Offline

Posts: 22

Joined: 7th Dec 2004

Ride: 95 EF Falcon

Location: adelaide
SA, Australia

bowsaw wrote:
shanker1974 wrote:
according to their vehicle service report YES!
Wouldnt trust those pricks, pull it off, 2 10mm bolts IIRC,or 2 screws, and have a look, it should be shiny if they have cleaned it, black if they havent, takes 5 mins.


will give it a go tommorow! Cheers!
Top
 Profile  
 
 
Posted: Wed Jan 19, 2005 12:47 am 
Smokin em up
Offline
User avatar

Age: 38

Posts: 259

Joined: 5th Nov 2004

Gallery: 6 images

Ride: XRGLi EF

Location: Perth
WA, Australia

bowsaw wrote:
shanker1974 wrote:
according to their vehicle service report YES!
Wouldnt trust those pricks, pull it off, 2 10mm bolts IIRC,or 2 screws, and have a look, it should be shiny if they have cleaned it, black if they havent, takes 5 mins.


hey bow saw u and i both know that when he pulls the ISC off that there is no chance in the world they would have cleaned it... its easier for them to say 'oh they run like that' hahaha thas the funniest thing ive heard...... just pull the whole throttle body off including ISC and give it all a good clean and soak in some throttle body cleaner... put back together see how u go.

 

_________________

BA XR8 manual ute black

Top
 Profile  
 
 
Posted: Wed Jan 19, 2005 12:51 am 
Oompa Loompa
Offline

Posts: 22

Joined: 7th Dec 2004

Ride: 95 EF Falcon

Location: adelaide
SA, Australia

azza wrote:
bowsaw wrote:
shanker1974 wrote:
according to their vehicle service report YES!
Wouldnt trust those pricks, pull it off, 2 10mm bolts IIRC,or 2 screws, and have a look, it should be shiny if they have cleaned it, black if they havent, takes 5 mins.


hey bow saw u and i both know that when he pulls the ISC off that there is no chance in the world they would have cleaned it... its easier for them to say 'oh they run like that' hahaha thas the funniest thing ive heard...... just pull the whole throttle body off including ISC and give it all a good clean and soak in some throttle body cleaner... put back together see how u go.


on the service report it has "inspect thriottle body" they crossed it out and wrote "cleaned" then they ticked rectified. it seems as if they may have done it!
Top
 Profile  
 
 
Posted: Wed Jan 19, 2005 12:20 pm 
Getting Side Ways
Offline
User avatar

Age: 61

Posts: 4102

Joined: 18th Nov 2004

Gallery: 10 images

Ride: PX2 Ranger 4x4 XLT Dual CAB

Location: Carrum Downs
VIC, Australia

shanker1974 wrote:
azza wrote:
bowsaw wrote:
shanker1974 wrote:
according to their vehicle service report YES!
Wouldnt trust those pricks, pull it off, 2 10mm bolts IIRC,or 2 screws, and have a look, it should be shiny if they have cleaned it, black if they havent, takes 5 mins.


hey bow saw u and i both know that when he pulls the ISC off that there is no chance in the world they would have cleaned it... its easier for them to say 'oh they run like that' hahaha thas the funniest thing ive heard...... just pull the whole throttle body off including ISC and give it all a good clean and soak in some throttle body cleaner... put back together see how u go.


on the service report it has "inspect thriottle body" they crossed it out and wrote "cleaned" then they ticked rectified. it seems as if they may have done it!


Still it a fairly easy job to confirm it for yourself.

 

_________________

Image
She's meanness put to music and the b**ch is born to run!
Like the sign says, "speed's just a question of money. How fast can you go?"

Top
 Profile  
 
 
Posted: Wed Jan 19, 2005 12:45 pm 
Smokin em up
Offline
User avatar

Age: 38

Posts: 259

Joined: 5th Nov 2004

Gallery: 6 images

Ride: XRGLi EF

Location: Perth
WA, Australia

just have a look urself buddy....maybe the cleaned the ISC but ur actual TB has built up a bit of s**t around the inside of the throttle....

 

_________________

BA XR8 manual ute black

Top
 Profile  
 
 
Posted: Wed Jan 19, 2005 10:17 pm 
Fordmods Newbie
Offline

Posts: 12

Joined: 6th Dec 2004

Location: BRISBANE
QLD, Australia

I would definately clean the ISC & throtle body again anyway. If you want a job done properly, you gota do it your self! Check plugs & leads, clean injectors as already mentioned. If it still runs rough it could be your coil pack. I've heard they do fail a bit. Mine did. I've done all of the above ($$$$$$). now runs perfect!
Top
 Profile  
 
 
Posted: Thu Jan 20, 2005 12:12 am 
Stock as a Rock
Offline
User avatar

Posts: 190

Joined: 7th Nov 2004

Ride: EF Mont ZL Lane 4x4 Bronco

Location: Widebay
QLD, Australia

e-falcon wrote:
I would definately clean the ISC & throtle body again anyway. If you want a job done properly, you gota do it your self! Check plugs & leads, clean injectors as already mentioned. If it still runs rough it could be your coil pack. I've heard they do fail a bit. Mine did. I've done all of the above ($$$$$$). now runs perfect!


How did you find out whitch one and what price are they? (also are they genuine only?)
Top
 Profile  
 
 
Posted: Thu Jan 20, 2005 2:51 pm 
Parts Gopher
Offline

Age: 71

Posts: 98

Joined: 5th Nov 2004

Location: Ipswich
QLD, Australia

shanker1974
Disconnect the crankcase ventilation hose from the tappet cover and plug the end of the hose and see if that fixes your problem. It is a known problem with LPG because the PCV hose lets air inbetween cylinders 2-3 making them run lean when on LPG, but not when on petrol. Ford have a kit to correct this problem
Station-rat 8-)
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 2  [ 21 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: Google Adsense [Bot] and 67 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Nov 25, 2024 1:11 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names