|
| lowie57 |
|
|||
|
Hey all, i should be getting my new/old xr6 engine put in within the next couple of weeks.
Just wondering about the precautions i should be taking when starting it up for the first time, as it has been sitting in a garage for the past 4 months with no oil etc in it. Any tips would be greatly appreciated. Nath. |
|||
| Top | |
|||
| SLO247 |
|
||
|
Crank it over for a bit without fuel or spark, to circulate the oil throughout the motor before you start it. Apart from that, just make sure you change whatever seals and stuff you can while its out, check it all over and obviously give it fresh plugs etc.
|
||
| Top | |
||
| TROYMAN |
|
||
|
you can crank it a bit if your worried about it. but not really necessary..
the last engine i did was sitting for 4 years and all i did was fit the engine added oil, coolant sprayed a little oil in the bores and fired it up. got oil pressure pretty much straight away. no problems.. |
||
| Top | |
||
| lowie57 |
|
|||
|
Thanks for the tips guys.
also just a quick question off topic, as its an XR6 Engine it has a bit more performance over the standard i6, but if im only using my gli ecu will that mean it will only be as quick as the engine it originally had in it? |
|||
| Top | |
|||
| phongus |
|
|||
|
lowie57 wrote: Thanks for the tips guys. also just a quick question off topic, as its an XR6 Engine it has a bit more performance over the standard i6, but if im only using my gli ecu will that mean it will only be as quick as the engine it originally had in it? Find yourself an XR6 ECU so that you get the correct fuel maps for the different camshaft/fuel reg and head set up...however you should be able to get away with standard ECU and should feel a bit better.
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| BenJ |
|
||
|
Also look for an EL Fairmont Ghia ECU, as these also had the tickford maps.
Cheers BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| lowie57 |
|
|||
|
does the standard Fairmont ECU's have the tickford maps? or only the Ghia's?
|
|||
| Top | |
|||
| TROYMAN |
|
||
|
lowie57 wrote: does the standard Fairmont ECU's have the tickford maps? or only the Ghia's? only the el fairmont ghias have the tickford maps as they are fitted with tickford engines.. the catch code will be 6dja,6djb, ect |
||
| Top | |
||
| lowie57 |
|
|||
|
i see in your sig Phong that you have an EL ecu with a J3 Chip in it. Could i just do that instead of finding another ecu?
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 68 guests |
