|
| winman |
|
||||||
|
car is a BA xr6 non turbo
ive brought a after market oil pressure gauge to install, and ive been told but lots of people and various websites to get a T piece adapter with the part number 230032, any way gauge comes in and sure enough it fits into this T piece adapter, very very very tight fit, but it fits in. any way after a very long time i finally get the factory sender out of the block (im using a combination of 19mm ring and normal spanner), anyway i go to test screw in the factory oil pressure sender to this T piece and the bloody factory one is significantly bigger then the input size of the T piece. ive used calipers on the factory oil pressure and its 17mm wide screw. have i pulled out the wrong sensor?? or is the T piece WAY off size. other info (it may or may not be wrong, tell me if it is i may have pulled out the wrong sender) -factory sender is 19mm nut with a 17mm width thread. -thread size on the T piece adapter is 13mm wide -above the oil filter their is 3 sensors or things that go into the block, if u drew a line between them all it would look like a triangle, the oil sensor is the bottom one closest to the front of the car ive got two photos taken below of the sensor i pulled out. is this even the oil pressure sender because to me it looks more like a oil temperature sender
_________________ BA XR6 |
||||||
| Top | |
||||||
| winman |
|
|||
|
come on really need help here
_________________ BA XR6 |
|||
| Top | |
|||
| Dansedgli |
|
||
|
Oil pressure sensor would have a hole in the end.
That doesnt look like it. You want the one closest to the filter I think. |
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
lol thats probably the knock sensor or something
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| winman |
|
|||
|
this is the closes i can see to the oil filter, a workshop manual said its a oil pressure switch, and oil came out of the hole when i took it out, but yer as u guys said it should have a hole in the top which it clearly doesnt, ive got a feeling its a oil temp switch, ive got hsc exam today so i cant check it out but tomorrow ill have a closer look
_________________ BA XR6 |
|||
| Top | |
|||
| winman |
|
|||
|
ok found the right oil pressure switch, and OMG that was a pain in the a*** to remove then reinstall with a send aswell
_________________ BA XR6 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot], Google Adsense [Bot] and 106 guests |
