im takin out my clutch cables and putting a new one in ive got the cable out from the gearbox side... now can anyone tell me the easiest way to get the cable out from the pedal side!!!

its a EB 6cyl
Cheers

move the drivers seat back as far as possible and climb under the steering wheel (very comfy)

feel around at the top of the clutch pedal and you will feel the cable connecting to it. The cable is held there by a little braket that slides over a shaft at top of the pedal and it held in place with a split pin. Once you find the split pin, pull it out with some pliers and you can then slide the braket off.

but you are not there yet. You still have to slide the cable out of the braket before you can pull it through the firewall. When you see the braket you will know how to do it.

cheers mate... got it nps...
lol yea its very v ery comfy down there!!! ill tell ya !

When you get the new one in, do you have to make any adjustments to travel of pedal etc, if so how??

with the ex you needed to adjust the nut on the cable at the fire wall.