|
| ReGiE |
|
|||
|
edfairmont4.0 wrote: Well ive just sent my engine into Mcnaughtons for a rebuild! cant wait to get her back 180+rwkw here i come. Seems like a top bloke there and quoted me a good price. No s**t either.
180rwkw? you going turbo?
_________________ Gooooone - Eb2 Coon - 143RWKW |
|||
| Top | |
|||
| Bsjenko |
|
|||
|
good to see champ. Ive been wanting to stop by there for a while now, just keep forgeting about it. i only live around the corner from it too...
_________________ The Lane Lives.... Finally!!!! |
|||
| Top | |
|||
| FairmontXR6 |
|
|||
|
About time nobby LOL
This is old news, I mean come on, you sent the sms this morning LOL. Since he's to lazy to reply, he's not going turbo, we're both chasing 180-200rwkws N/A no NOS.
_________________ 1993 Ford Fairmont EB II 5.0L V8 Wagon |
|||
| Top | |
|||
| edfairmont4.0 |
|
|||
|
ashcook wrote: I know you have already sent the engine off but I had some work done out at Toronto Head Service by the owner Scott. He did the regrind, hone and other bits and pieces on my clevo, heaps cheaper than anyone else, top job and great to deal with. Maybe keep him in mind
thanks dude yeah all im getting done is the bottom end work, the head has already been done, he said the bottom end looks pretty healthy so its not going to need much its getting acid dipped, bearings rings and a rehone at this stage.. the head is there getting some heli-coils but thats it, he said 1200-1500 so thats pretty reasonable
_________________ ED Fairmont, Ghia mock DOHC-T 11.6 @ 118 Trying to get back to the 1/4! |
|||
| Top | |
|||
| edfairmont4.0 |
|
|||
|
castlegreyskull wrote: good to see champ. Ive been wanting to stop by there for a while now, just keep forgeting about it. i only live around the corner from it too...
thanks dude, when ive got the engine in and 4.11's (which is pretty much all thats left to do) should have a ford meet how many ford fanatics are down here?
_________________ ED Fairmont, Ghia mock DOHC-T 11.6 @ 118 Trying to get back to the 1/4! |
|||
| Top | |
|||
| edfairmont4.0 |
|
|||
|
FairmontXR6 wrote: About time nobby LOL
This is old news, I mean come on, you sent the sms this morning LOL. Since he's to lazy to reply, he's not going turbo, we're both chasing 180-200rwkws N/A no NOS. lol nob head! yeah no hairdryers for us! just i6 BALLS.
_________________ ED Fairmont, Ghia mock DOHC-T 11.6 @ 118 Trying to get back to the 1/4! |
|||
| Top | |
|||
| OBS35N |
|
|||
|
ah good stuff, you wont regret it cause i was very happy with my engine when it was done...... now for the F6 lol
_________________ OBS35N is gooonnnneeee.
|
|||
| Top | |
|||
| edfairmont4.0 |
|
|||
|
OBS35N wrote: ah good stuff, you wont regret it cause i was very happy with my engine when it was done...... now for the F6 lol
yeah cant wait to get it back!, what did you get done
_________________ ED Fairmont, Ghia mock DOHC-T 11.6 @ 118 Trying to get back to the 1/4! |
|||
| Top | |
|||
| edfairmont4.0 |
|
|||
|
ashcook wrote: I paid from memory $200 for a crank grind, $50 for a hone, $5 each piston pin to be put on and I think $50 to install cam bearings. Maybe some other stuff but can't remember then I built the engine myself. My heads were already flowed and the crank and rods were already balanced.
nice! you no im not sure if my quote included oversized pistons... rebore if it needed it. hopefully wont need that !
_________________ ED Fairmont, Ghia mock DOHC-T 11.6 @ 118 Trying to get back to the 1/4! |
|||
| Top | |
|||
| FairmontXR6 |
|
|||
|
edfairmont4.0 wrote: FairmontXR6 wrote: About time nobby LOL This is old news, I mean come on, you sent the sms this morning LOL. Since he's to lazy to reply, he's not going turbo, we're both chasing 180-200rwkws N/A no NOS. lol nob head! yeah no hairdryers for us! just i6 BALLS. DAMN STRAIGHT 
Any updates (LOL - I have no patientice  )
_________________ 1993 Ford Fairmont EB II 5.0L V8 Wagon |
|||
| Top | |
|||
| edfairmont4.0 |
|
|||
|
UPDATE FOR FAIRNOBXR6 lol
Engine is in the shop: They found the bottom end is f**k tidy! just needs rings, bearings, rehone and walaa!, they are upping my compression to 10:1, 17thou off the block, and just a smidgen more off the head. They are ordering me a wild camtech cam! wooo not much smaller than my Surecam but tighter lobe separation (110). RPM RANGE 2800-7000 hehehe i wont be going over 6000 lol poor au motor Now the s**t.... they found that my Tickford head had 39MM exhaust valves fitted and were almost f**k as they are to small, (Supposed to be 41mm) and one intake valve was slightly bent WTF HEADSENSE! so it wasnt sealing very well if at all they rekon and i went in and had a look WTF.. so they are putting new valves in, heli-coiling the head where the previous owner f**k it up. So i should have a fast AU XR6 4.0L Soon so im happy and p****d off at the same time because the head work wasnt cheap but s**t happens. The end quote for everything including the cam is $2000 so thats not bad i think. CAM SPECS: Fair idle, good mid range and top end power. Designed for engines with limited modifications. Min comp ratio 9.5:1. RPM RANGE 2800-7000, Manual or Hi-Stall. Cam timing intake 23-63 exhaust 63-23, Duration '266 in/ex , Cam lift 265 in/ex. Lobe separation 110. Im heading in there today anything else ill let ya know.
_________________ ED Fairmont, Ghia mock DOHC-T 11.6 @ 118 Trying to get back to the 1/4! |
|||
| Top | |
|||
| FairmontXR6 |
|
|||
|
A post all for me! Thanks mate
Can't wait....
_________________ 1993 Ford Fairmont EB II 5.0L V8 Wagon |
|||
| Top | |
|||
| edfairmont4.0 |
|
|||
|
lol i hate waiting!!!!!!! excited !
not much to report after going in just more progress... well um the head looks sexy nice n shiney, helicoiled so all the threads are perfect now YAY! new valves and valve stems in... mmm new engines are sex, the head is slightly more shaved, the block was being decked just as i arrived... its all looking good and should be knocked over by thursday im reckoning! need to get some more goodies now, EL alloy radiator, and thermos. might start pulling out my old engine this weekend coming, sand it prep it n paint it. is an old motor worth anything in scrap IE the alloy head?
_________________ ED Fairmont, Ghia mock DOHC-T 11.6 @ 118 Trying to get back to the 1/4! |
|||
| Top | |
|||
| OBS35N |
|
|||
|
so how did it go? hows the motor..... mzake sue u treet it right until its run in
_________________ OBS35N is gooonnnneeee.
|
|||
| Top | |
|||
| gogetta |
|
|||
|
yeah would be interesting to hear an update...esp how close/far you are away from the 180rwkw....
_________________ |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 68 guests |
