|
| xELFalconx |
|
|||
|
naughtyfalcon wrote: a wade cams 1636 will suite it well Seems like a good one, especially since it suits the stock springs and ECU. I'm on the Wade website now... any idea how I can order one? I live in SA so it's a fair drive to go pick one up haha. Lowlane7 wrote: No worries. Nice looking car there. You should make a build thread, put up some more pics! Cheers! I've done a fair bit to it since I got it, but mainly cosmetic and repairs. Not sure it's worth a build thread just yet, but I wouldn't mind making one.
_________________ 4.0L Tickford six, 1645b E-series custom grind, MLS gasket, performance valve springs, 3" stainless intake, extractors, 2.5" Lukey, 100cpi hi-flow, T5 manual, J3 tune. |
|||
| Top | |
|||
| ranga83 |
|
||
|
just give wade a call, they will post one out, and you can send yours back to them for the exchange
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| GeZza200 |
|
||
|
Make sure you know what head is on your EL, if its a Hybrid or not. It will say 94DA or 96DA. On the 94DA you will use the Wade 1636 and with the 96DA you will use the Wade 1502AU.
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| Pakrat |
|
||
|
Wade 1673 I got is fine with standard springs.
|
||
| Top | |
||
| XHR6 |
|
||
|
Hey buddy I did my stage one which is what you have practically done.
My stage 2 was valve springs cam gear and a wade 977b. It kicks in around 2300-2500 but is adjustable via cam gear. wade have have a lot of catagory cam grinds available. + I heard you get a discount mentioning ford mods. I picked up a GLI cam for $10 and got them to do the regrind for $180ish. I'm happy with my set up, but chasing more power. My J3 was tuned by a bloke in the site and saved a bit. After new cam( maybe) I'm going into hallam for the dyno.
_________________ XHI Tickford XR6, 5 speed, Wade 977b@110 + Cam Gear , Pacemaker 4480, 100c Cat, 2 1/2"CB, |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 88 guests |
