|
| smoke_ |
|
|||
|
yeah didn't think you could up compression to 12:1 without some form of engine seizure.
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| turboef |
|
||
|
yeah , if ur going to keep it n/a , get some cold air into it
|
||
| Top | |
||
| fastleno |
|
|||
|
smoke_rubber wrote: yeah didn't think you could up compression to 12:1 without some form of engine seizure.
yer load of crap what everyday fuel could you run with 12:1 without detonation? none unless you live at the airport. it would destroy the pistons first start anyways. to many other problems to mention |
|||
| Top | |
|||
| downingj |
|
||
|
fastleno wrote: smoke_rubber wrote: yeah didn't think you could up compression to 12:1 without some form of engine seizure. yer load of crap what everyday fuel could you run with 12:1 without detonation? none unless you live at the airport. it would destroy the pistons first start anyways. to many other problems to mention 12:1.......C'MON!!! Anyway, it sounds like your EB is putting out plenty of power. Time for some nice rims with a good quality set of tyres. A nice, slick paint job (blueprint looks hot) with a chunky bodykit and EB XR rear bob tail. Mmmmmmmmmm yum! 
Your car obviously flies. Make it look like it's not to be F**k with. If your not keen on that, a suspension upgrade would be the best bet. Especially for a non-XR EB... |
||
| Top | |
||
| fastleno |
|
|||
|
i want to get my crank ground with a 60 thou offset using oversize bigend bearings, standard rods and a set of 50 thou oversize deckable pistons, that would have to pick up a few cc's.
|
|||
| Top | |
|||
| brendo_83 |
|
||
|
I'd be seriously afraid if my eb revved to whats on you pic.
High revving engines scare me, I hate when things go bang. |
||
| Top | |
||
| fastleno |
|
|||
|
brendo_83 wrote: I'd be seriously afraid if my eb revved to whats on you pic. i have had it off the tacho no real point though it stops making power about 5500rpm, i have been told that the rockers are inclined to snap with at 6500, i have a 14yr old nefew, he is into speedway drives a xf with a full rebuilt au tickford motor goes hard, he tells me he has had it to 6500 still making power but it runs a 350 holley and a crossflow dissy and other mods, he wins most junior events with it
High revving engines scare me, I hate when things go bang. |
|||
| Top | |
|||
| smoke_ |
|
|||
|
au tickford motor with a carby??
got pics?
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| fastleno |
|
|||
|
umm i could probly get one
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 95 guests |
12.06@120MPH