|
| ashley041992 |
|
||
|
I have a Fg Xr6 N/a 6 Speed Manual with Hyclones, Cold air, Extractors and 2 and half catback, Stage 4 atomic cams underive pully valves springs been done irduim spark plugs and flash tune. came to 292 rwhp. Is that about right? ive seen some other with less work than mine and have more hp? Oh and 17lt per 100 with tune? a bit extreme and only a little squirt here and there?
Last edited by ashley041992 on Sun Feb 19, 2012 9:53 pm, edited 1 time in total. |
||
| Top | |
||
| Pakrat |
|
||
|
Whyd you put hyclones in it.
|
||
| Top | |
||
| ashley041992 |
|
||
|
just wanted to see if they would do anything and honestly? nothings changed.
|
||
| Top | |
||
| bennomate |
|
||
|
First of all, take it down the 1/4 mile see what it runs. Much better indication of power than a dyno, as they all read differently and the differences can be pretty big.
Second of all, hyclones from what i can see are just like ebay 12v superchargers and 13hp resistor chips. If they were that fantastic dont you reckon car manufacturers would put them in from the factory? Third, fat cams are inefficient. Or you have a dud tune. What sort of driving are you doing? short stop start hills? maybe thats it. Lastly, buy a v8...
_________________ F6 Typhoon Silhouette with Dark Argent rims, build P0001. Stock as a rock and staying that way. |
||
| Top | |
||
| TheKrazeD |
|
||
|
Why say buy a v8... Not everyone wants a v8.
_________________ VIXEN FG XT Previous best - 14.431 @ 99.69mph with minor mods |
||
| Top | |
||
| bry40l |
|
|||
|
bennomate wrote: hyclones from what i can see are just like ebay 12v superchargers and 13hp resistor chips. If they were that fantastic dont you reckon car manufacturers would put them in from the factory? Lastly, buy a v8... yeah but real turbos and superchargers are fantastic.... car manufacturers dont put them into every car. not everyone wants a v8
_________________ BF XR6 |
|||
| Top | |
|||
| TROYMAN |
|
||
|
ashley041992 wrote: I have a Fg Xr6 N/a 6 Speed Manual with Hyclones, Cold air, Extractors and 2 and half catback, Stage 4 atomic cams underive pully valves springs been done irduim spark plugs and flash tune. came to 292 rwhp. Is that about right? ive seen some other with less work than mine and have more hp? Oh and 17lt per 100 with tune? a bit extreme and only a little squirt here and there? thats not a bad power number, 292 rwhp is around 216rwkw.. std fg xr6 turbos put out around 220rwkw.... |
||
| Top | |
||
| phongus |
|
|||
|
bry40l wrote: bennomate wrote: hyclones from what i can see are just like ebay 12v superchargers and 13hp resistor chips. If they were that fantastic dont you reckon car manufacturers would put them in from the factory? Lastly, buy a v8... yeah but real turbos and superchargers are fantastic.... car manufacturers dont put them into every car. not everyone wants a v8 Extractors are also better, they increase efficiency if done right but car manufacturers don't put that on. If it's not cost effective, they won't put it on...that's why you get heavy cast iron exhaust manifolds, because they are cheaper, made much more quickly and work according to standards. +1 not everyone wanting a V8.
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| ashley041992 |
|
||
|
P plate laws mate. otherwise i would of. and the tune? it's been a drama since day one. trouble starting and even if i baby it still chews the fuel. and if i took down the strip what would the times and whatnot be??
|
||
| Top | |
||
| bry40l |
|
|||
|
ashley041992 wrote: P plate laws mate. otherwise i would of. and the tune? it's been a drama since day one. trouble starting and even if i baby it still chews the fuel. and if i took down the strip what would the times and whatnot be?? shouldve taken it back to where you got the tune done and got them to fix the problem...
_________________ BF XR6 |
|||
| Top | |
|||
| ashley041992 |
|
||
|
anyone know what else i can do to push some more power out without spending abit of money?
|
||
| Top | |
||
| MMD |
|
||
|
a 3inch Exhaust might be a good option, and a hi flow cat if you don't have one all ready.
also the tune was it a custom job or a universal flash tune? What brand Extractors do you have ? |
||
| Top | |
||
| EFFUTURA4.05SP |
|
|||
|
Cant really look further than:
Attachment: images.jpg [ 7.16 KiB | Viewed 1157 times ] Attachment: imagesCAJELX02.jpg [ 7.04 KiB | Viewed 1149 times ] Attachment: imagesCA9BIWEQ.jpg [ 9.39 KiB | Viewed 1153 times ]
_________________ 1996 EF Futura factory manual |
|||
| Top | |
|||
| EFFUTURA4.05SP |
|
|||
|
POWAH ADDER!
_________________ 1996 EF Futura factory manual |
|||
| Top | |
|||
| ashley041992 |
|
||
|
Buhahahaha p plate laws mate, and i allready have extractors and exhaust i have a custom extractors with 3 or a 3.5 inch outlet.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 98 guests |
Cobalt blue EF XR6, Pacemaker 4499s, 2.5" redback catback, intake, head shaved, wade 977b, crow valve springs, pedders suspension.
