|
| LUMO |
|
|||
|
is there a such think as a oil catch can for a twin cam and can i use any catch can for my xr6 turbo ba
_________________
|
|||
| Top | |
|||
| twr7cx |
|
|||
|
you don't need a special catch can for a twin cam engine. yes any one can be used.
|
|||
| Top | |
|||
| vik351 |
|
|||
|
LUMO wrote: is there a such think as a oil catch can for a twin cam and can i use any catch can for my xr6 turbo ba
Mine worked a treat,and dont put anything in it like some say,I found you dont need it... 
After about 1000 k's 
Paint the thing black and you wouldn't know it was there... 
vik...
_________________ [b]BANNED[\b] |
|||
| Top | |
|||
| LUMO |
|
|||
|
thanks for the reply dude
does the catch can need a breather, do u have one or do u have a return line back to the sump or something thanks
_________________
|
|||
| Top | |
|||
| vik351 |
|
|||
|
No breather on this type,this type is just a inline catch can
Look at the last happy,you disconnect the hose from the rocker cover,get a new hose,that goes to the catch can,the existeng hose hooks up to the catch can too,I just used a 1/2" irrigation pipe joiner,and thats it vik...keeps oil out of the turbo pipes,TB stays clean...
_________________ [b]BANNED[\b] |
|||
| Top | |
|||
| vik351 |
|
|||
|
You have to empty it out manually,there ia a plug on the bottom of it for that... vik...when you see oil in the sight tube,drain the thing...
_________________ [b]BANNED[\b] |
|||
| Top | |
|||
| LUMO |
|
|||
|
Are u using both pvc valves to go in the catch can or just one
Are running a return line back in to the inlet manifold If u are using both pcv why I pressuring the catch can Please keep in mind twin cams have 2 pcv valves
_________________
|
|||
| Top | |
|||
| LUMO |
|
|||
|
Are u using both pvc valves to go in the catch can or just one
Are running a return line back in to the inlet manifold If u are using both pcv why I pressuring the catch can Please keep in mind twin cams have 2 pcv valves
_________________
|
|||
| Top | |
|||
| vik351 |
|
|||
|
What car you got
same as mine in the happysnaps??? there is only one PCV on the rocker,the front one is the air supply in to the rocker,the rear one is the PCV,which you tap the can into vik...look at the pic closley
_________________ [b]BANNED[\b] |
|||
| Top | |
|||
| LUMO |
|
|||
|
XR6 TURBO
_________________
|
|||
| Top | |
|||
| vik351 |
|
|||
|
See the broken fitting,yours will break too,onya ford... this is the fresh air line to the rocker cover... vik...not a PCV,thats at the back
_________________ [b]BANNED[\b] |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 98 guests |
