|
| tank |
|
||
|
Can anyone help I've just put an EL motor into an EF I'm having problems with oil pressure, I've only just noticed the sump is pushed in at the deep end of the pan, I'm picking this may cause dramas with the oil pick-up getting the oil. Takes awhile to build-up pressure when cold, but then once pressure is up all is well until you power it. If you think this is the problem is it possible to change sump whilist in the car?
|
||
| Top | |
||
| nannas_ed |
|
|||
|
pick-up is most likly damged. really should have pulled the pan off and checked it before it went in the hole.
_________________
|
|||
| Top | |
|||
| Disco Frank |
|
|||
|
it can be changed
undo the engine mounts and lift the engine up u should gain enough clearnce to change the sump maybe also your oil pump could be fooked
_________________ RIP SCOTT |
|||
| Top | |
|||
| tank |
|
||
|
Thanks guys my worst fear, I'll get the spanners back out
|
||
| Top | |
||
| smoke_ |
|
|||
|
i'd get a proper test gauge onto it first, just to confirm it's actually the pressure that is the problem or the gauge
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
if you want to remove the dent in the sump you can get a cheap dent puller from supercheap. it will have a threaded end, just weld a few nut of teh right thread to sump screw in the puller and carefuly pull the dents out.
do not try and get the dent out in one go, use 5 or 6 nuts spred out evenly and work them all, don't focus on one nut or you may tear a hole in the sump when you're done grind the nuts back |
||
| Top | |
||
| MARK.TANIA |
|
||
|
you can also take the xmember off as well.
|
||
| Top | |
||
| GTBob |
|
|||
|
If the sump is dented it has probably damaged the pickup AND maybe the oil pump should be thoroughly checked before more damage happens ( like bearings etc)
 
_________________ Rotten Old Revhead!!! XW GTHO + EF ex cop car (exractors 2.5 cat back zorst !6" Simmons K&N +airbox mods Lowered with Bilstein shocks+Whiteline Bars NEXT THING Swap HO for GTP or Ferrari! |
|||
| Top | |
|||
| Dellboy999 |
|
|||
|
Disco Frank wrote: it can be changed
undo the engine mounts and lift the engine up u should gain enough clearnce to change the sump maybe also your oil pump could be fooked yeah just enough if you remove the radiator and the a/c condensor etc or move them ouyt of the way to keep the gas (yes i have done this) otherwise drop the k-frame else pull the motor back out.
_________________ Full working BA Shifter now upgraded to BF Shifter. |
|||
| Top | |
|||
| tank |
|
||
|
Thanks for your help guys much appriciated
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 104 guests |
