|
| Disturbed_Dave |
|
|||
|
Hey all, drove around a bit today, getting prices on:
1: Exhaust 2. Cam Best pricing i found was: 1: Exhaust - Xforce Extractors (Polished Stainless), 2 1/2 inch mandrel bend exhaust, Magnaflow Cat, 2 x High Flow Muffers + 3 1/2 dump tip = $1100 Fitted 2: Cam - Stage 2 Crow cam fitted = $600 Opinions on this pricing? I've gone the stage 2 for now so i dont have to fork out for a new ECU, but later down the track i might upgrade to a stage 3. Also, The guy doing the cam reckons, since my car is pulling 116rwkw basically stock (only raised compression), i could get an extra 30kw out of the cam alone, true?
_________________
|
|||
| Top | |
|||
| Disturbed_Dave |
|
|||
|
Oh, and have anyone heard anything about these Xforce extractors? The installer has a good rep for his exhausts, and he swears by these! Plus i reckon the Polished Stainless look better than the Pacies
 personal opinion
http://www.bestmufflers.com/Xforce_Exha ... ord_ea.htm
_________________
|
|||
| Top | |
|||
| stomper |
|
|||
|
sorry i cant help but how much is the crow SUPPLIED not fitted?
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| Disturbed_Dave |
|
|||
|
not too sure, sorry... i only got fitted prices, so then i can fall back on warranty/fitters warranty if something goes wrong.
CJT Racing is who i got the quote from, they are in Melton. 9747 9988
_________________
|
|||
| Top | |
|||
| Steady ED |
|
|||
|
I got the X-Force extractors... they ain't a bad design, the secondaries are probably a bit short, compared to the primaries, so in theory they promote top end, but i can't compare them to anything else cause ive never had anything else.
Don't buy them just for the polished stainless. They get some pretty funky discolouration after the first drive anyway.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| smiley235 |
|
|||
|
that exhaust sounds really cheap, I got quoted 1100 fitted for extractors, 2 1/2 mild steel press bent and no cat included, where'd you get that quote?
_________________ 178.3 rwkw
|
|||
| Top | |
|||
| Southy |
|
|||
|
a Brand new Crow is 399 supplied. dont bother getting someone to fit it. you will be able to do is easily
|
|||
| Top | |
|||
| Disturbed_Dave |
|
|||
|
Exhaust was quoted at Taylah Made Exhausts in Melton...
As far as the cam goes, $200 is a bit for fitting i agree, but in the off chance something goes wrong and the engine bends itself over and f**k itself, i want to be able to rely on warranty. Plus, Taylah Made and CJT are 10 steps from eachother, i can get it done at the same time (one finished, and rolls it into the other's garage. So its a mega convienience. Taylah Made Exhausts are an awesome fitter, they did my last car with a set of extractors and exhaust, also 3 of my mates cars, never had a problem, sound and perform great. Highly recommended *stops rant*
_________________
|
|||
| Top | |
|||
| shiftyford |
|
||
|
You could also try Di Phillipo exhausts in melton ,I work at Aero manufacturing Australia and we supply darren in melton with all his exhaust components.
|
||
| Top | |
||
| kwaussiekid |
|
||
|
Jody at Taylah made is the best! I know him well.Darren's extractors are slated to be the best in the business for all situations,but you pay the price! There is a thread here somewhere about Genie 21X extractors.
Makes good reading.
_________________ The older I get the better I was! |
||
| Top | |
||
| Southy |
|
|||
|
there is nothing you can do to f**k it. just put the new one in the same way the old one came out
|
|||
| Top | |
|||
| smiley235 |
|
|||
|
yes but thats 20 less little bolts you need to undo on the rocker gear
_________________ 178.3 rwkw
|
|||
| Top | |
|||
| Disturbed_Dave |
|
|||
|
ive asked the guys at TME about their different extractors, and they still swear by these Xforce's... so i might have to take their word for it, as they've never done wrong by me before.... anyway, off to work
_________________
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 77 guests |
