|
| metasaiah |
|
|||
|
What's the ideal compression for a worked, naturally aspirated six - and how do I get it?
_________________ EF2 Fairmont Ghia. AU2 engine running EF gear. Intake, exhaust, injection etc; 8" rear stockies with 265/50R15 rubber. Shiftkitted auto, J3, custom grille and dash cluster and lots of other useless crap... |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
metasaiah wrote: What's the ideal compression for a worked, naturally aspirated six - and how do I get it?
whats the cams specs? and what fuel will you be using? |
||
| Top | |
||
| metasaiah |
|
|||
|
Haven't decided on a cam yet. Fuel is BP Ultimate 98. At the moment I have only intake/exhaust mods but I'm looking at a complete top-end rebuild for street performance. Will also modify the auto trans and diff ratio.
_________________ EF2 Fairmont Ghia. AU2 engine running EF gear. Intake, exhaust, injection etc; 8" rear stockies with 265/50R15 rubber. Shiftkitted auto, J3, custom grille and dash cluster and lots of other useless crap... |
|||
| Top | |
|||
| cjh |
|
|||
|
metasaiah wrote: Haven't decided on a cam yet. Fuel is BP Ultimate 98. At the moment I have only intake/exhaust mods but I'm looking at a complete top-end rebuild for street performance. Will also modify the auto trans and diff ratio.
You may need pistons with smaller cc dish in them yet, depending on cam specs. You'd better take your time in working out what you want it for, and what your going to do with it, or waste time & money.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| fordfreak ef |
|
|||
|
shaving the head will also net you a slight gain in commpression...
|
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
metasaiah wrote: Haven't decided on a cam yet. Fuel is BP Ultimate 98. At the moment I have only intake/exhaust mods but I'm looking at a complete top-end rebuild for street performance. Will also modify the auto trans and diff ratio.
you need to know what cam you want to use befor knowing what the best C.R. is. that being said you're stuck by having to use 98octane fuel. about 10:1 is the most you'll be able to use |
||
| Top | |
||
| skidder |
|
|||
|
shaving the head isn't a good way to gain compression. Blow a head gasket and their is less meat to fix any warpages before there's no dice. Also can create issues with the timing chain as it stretches.
_________________ EVL098 wrote: Cramping in the hand from having it on your Wang for an excessive period of time is a definate con. Seriously do people google "f**k up modifications for Fords owned by Jews" and get linked straight to this site nowadays? AU,factory fitted tickford kit/IRS, t5,Sports ryder/KYB: gone. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 138 guests |
