|
| Autofast2 |
|
||
|
Are there any other options for the au falcon? its for NA set up after higher comp really as i think the stock pistons are fairly strong, acl get them made by MAHL and you can get them in a kit like the acl race kit but it comes only with pistons and rings,would make comp in the high 10s i think,so is this the only option? have checked with other suppliers but no luck,maybe custom but what kinda cost? any body got advise on this? or have a set up, and know roughly there comp ratio? thanks
_________________ YOU CAN LIVE IN A CAR BUT YOU CANT DRIVE A HOUSE |
||
| Top | |
||
| skidder |
|
|||
|
I think its ony ACL's forgies that get made by Mahle and the rest are made here, but to be honest I haven't considered getting ACL's non-forged pistons in so long that this may have changed.
If looking at hypertuetic I wouldn't get ACL's as have seen them used before (although not in a ford) and the ringlands have issues. Also From memory the compression for the ACL race series is around 9.8:1 using e-series stuff and 10.2 if you use the AU pistons and rods.
_________________ EVL098 wrote: Cramping in the hand from having it on your Wang for an excessive period of time is a definate con. Seriously do people google "f**k up modifications for Fords owned by Jews" and get linked straight to this site nowadays? AU,factory fitted tickford kit/IRS, t5,Sports ryder/KYB: gone. |
|||
| Top | |
|||
| MICKYYYY |
|
||
|
Definatly use ACL Race series pistons as there good value for money and are a very good piston
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| Autofast2 |
|
||
|
Looks like its ACL for pistons then,its for the vct au so i guess the comp ratio will be up there, i have had the head shaved already so maybe it will help a little. thanks for the info
_________________ YOU CAN LIVE IN A CAR BUT YOU CANT DRIVE A HOUSE |
||
| Top | |
||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
only the BA turbo piston are 'made by mahle'. ACL owns mahle. so in reality they are made by ACL.
the cast pistons are not made by mahle. but yes they are basicly your only option. |
||
| Top | |
||
| GeZza200 |
|
||
|
I got a set of AU ACL Race pistons in mine and my car holds up strong, when i get the supercharger it will test the strength of them i guess.
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| Autofast2 |
|
||
|
Was talking to NASON engine parts and they said at the moment mahle wont be making anymore ACL race series pistons for the au engine untill they get some good orders for them,so whatever i can find in stock is what i get,problem is to save on cost i want to buy them wholesale but there is only 1 set of 10 thou over showing in there stock,so might have to hunt around for a set,what kinda price have you paid for a set of acl race pistons? thanks
_________________ YOU CAN LIVE IN A CAR BUT YOU CANT DRIVE A HOUSE |
||
| Top | |
||
| djcustomcomputing |
|
|||
|
its crap how they have stopped making them for the moment ive had trouble getting a set
im just going to get some custom made as for price on the ACL piston and ring set race series repco quoted $374 but i think this is wrong as there wholesale price is above that  autobahn quoted me $609 there was another quote also back about a month ago i had a thread regarding this
_________________ MY BUILD THREAD |
|||
| Top | |
|||
| gogetta |
|
|||
|
hypertec flatops are available for the AU....should be able to get some for u for about $400 with rings...just off the top of my head....can find exact price for u if u like
these are just as good if not better than the acls which have been known to break rings on installation easily if your not EXTREMELY careful.....
_________________ |
|||
| Top | |
|||
| djcustomcomputing |
|
|||
|
im ok for the moment as im hunting for another engine to do the rebuild to otherwise my car will be off the road for a few weeks
im in no rush probably mid year holidays ill do it (im still at school) ill start gathering parts a bit before that ill keep your name in mind for then
_________________ MY BUILD THREAD |
|||
| Top | |
|||
| cjh |
|
|||||||||
|
tickford_6 wrote: only the BA turbo piston are 'made by mahle'. ACL owns mahle. so in reality they are made by ACL. the cast pistons are not made by mahle. but yes they are basicly your only option. The BA LPG pistons are made by Mahle. Mahle is a german company, and are the supplier for a lot of European car companies as well as some USA companies too. Here are some pics of a BA LPG piston. They were 10.7:1 comp ratio. They have graphite coated skirts, and a raised crown, instead of the usual dish. Note it has 4 valve reliefs, instaed of just 1 for the earlier ( 2 valve head ) pistons.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||||||||
| Top | |
|||||||||
| gogetta |
|
|||
|
whats the story behind that single BA piston....didnt know u could buy just one like that....prbably because id be too scared to go into to ford and ask them the price!!
_________________ |
|||
| Top | |
|||
| MICKYYYY |
|
||
|
Can that BA piston be used in a AU engine with AU rods at all???
Heaps of compression which is great for LPG
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| Autofast2 |
|
||
|
thats a good question? will they fit the au motor?also since we are on this subject will ba gas rods fit the au crank? can get cheap ba gas motor that needs rebuild
_________________ YOU CAN LIVE IN A CAR BUT YOU CANT DRIVE A HOUSE |
||
| Top | |
||
| MICKYYYY |
|
||
|
Well ive read that you can use turbo pistons and rods from BA in a EF/EL and AU engine so i carnt see why not.
Im going to look into this and see what info i find Build a AU engine for a EF XR6 with these pistons and would be sweat as my car is on LPG so it should get abit more power from the compression increase and LPG to support the octane needed.
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 115 guests |
