|
| Hectic_xr6 |
|
||
Age: 38 Posts: 5 Joined: 3rd Jul 2015 Ride: BF XR6 N/A engine with turbo Location: Mildura |
Hey people,
I've got an NA BF barra motor and it's got a turbo on it, all tuned and aet up properly. Does anyone know what the power limits are on these things?
_________________ BF XR6 N/A engine with turbo. Process west tb relocation, custom intercooler piping, Garrett GT3582r, 3 1/2 dump pipe with separate wastegate pipe, 80lb deka injectors, underdrive pulley kit, battery relocation. Still using standard diff and ZF gearbox. 245rwkw and 725nm of torque on 8psi |
||
| Top | |
||
| dingo ford |
|
||
|
The weakest part in the barra motors are the piston connection rods if I remember correctly 450kwt is about as far as you would push it & stay under 6000 rpm other wise your looking for trouble or rebuild with better internals to handle more power than you have to fix the next weakest link gearbox, tail shaft diff etc hope this helps
|
||
| Top | |
||
| bry40l |
|
|||
|
ba n/a high comp bottom end wouldnt wanna be pushed over 250rwkw, you could go further if a tuner knew what he was doing but it would be a pretty soft tune, if your running the factory boost control from the pcm you can take out boost where it counts to save the bottom end,
_________________ BF XR6 |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
Can go higher ? Depends on tune ? Always use 98 fuel.. A water / Meth kit keeps Pistons safe, improves octane and cools intake .. Win win..
http://www.alcohol-injection.com/en/2-w ... ction-kits
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 48 guests |
