Fordmods Logo

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Power loss down low. Any Ideas. 

 

Page 1 of 1 [ 10 posts ] 

Post New Topic Post Reply  Previous topic Next topic
 
Parfie_96falcon
 Post subject: Power loss down low. Any Ideas.
Posted: Tue Apr 05, 2011 9:04 pm 
Oompa Loompa
Offline

Age: 31

Posts: 31

Joined: 21st Jan 2010

Gallery: 4 images

Ride: Ford Ef Falcon

Location: Clermont
QLD, Australia
hey, just wondering if anyone has any ideas of what my problem could be? i have an 96 ef manual, my problem is that my car is very sluggish until about 2500rpm. it has only recently started going it, it is really starting to annoy me as it is really slow to 2500rpm then just kicks in and goes good.. any ideas?
cheers!
Top
 Profile  
 
 
hans hartman
 Post subject: Re: Power loss down low. Any Ideas.
Posted: Tue Apr 05, 2011 9:08 pm 
Getting Side Ways
Offline

Age: 73

Posts: 2542

Joined: 18th Mar 2006

Ride: EF-XR8chaser

Location: wollongong
NSW, Australia
slipping clutch-worn out

 

_________________

R.I.P HANS HARTMAN
Top
 Profile  
 
 
Parfie_96falcon
 Post subject: Re: Power loss down low. Any Ideas.
Posted: Tue Apr 05, 2011 9:34 pm 
Oompa Loompa
Offline

Age: 31

Posts: 31

Joined: 21st Jan 2010

Gallery: 4 images

Ride: Ford Ef Falcon

Location: Clermont
QLD, Australia
but it also has a rough idle so im thinking it has something to do with it.
hans hartman wrote:
slipping clutch-worn out
Top
 Profile  
 
 
hans hartman
 Post subject: Re: Power loss down low. Any Ideas.
Posted: Tue Apr 05, 2011 9:44 pm 
Getting Side Ways
Offline

Age: 73

Posts: 2542

Joined: 18th Mar 2006

Ride: EF-XR8chaser

Location: wollongong
NSW, Australia
Parfie_96falcon wrote:
but it also has a rough idle so im thinking it has something to do with it.
hans hartman wrote:
slipping clutch-worn out

get the motor running sweet first,read the i6 forum on similar troubles,scan the ecu for codes,was it a auto to manual conversion?

 

_________________

R.I.P HANS HARTMAN
Top
 Profile  
 
 
Parfie_96falcon
 Post subject: Re: Power loss down low. Any Ideas.
Posted: Tue Apr 05, 2011 9:54 pm 
Oompa Loompa
Offline

Age: 31

Posts: 31

Joined: 21st Jan 2010

Gallery: 4 images

Ride: Ford Ef Falcon

Location: Clermont
QLD, Australia
hans hartman wrote:
Parfie_96falcon wrote:
but it also has a rough idle so im thinking it has something to do with it.
hans hartman wrote:
slipping clutch-worn out

get the motor running sweet first,read the i6 forum on similar troubles,scan the ecu for codes,was it a auto to manual conversion?

how do i scan the ecu? and yeah it was a conversion.
Top
 Profile  
 
 
hans hartman
 Post subject: Re: Power loss down low. Any Ideas.
Posted: Wed Apr 06, 2011 2:44 am 
Getting Side Ways
Offline

Age: 73

Posts: 2542

Joined: 18th Mar 2006

Ride: EF-XR8chaser

Location: wollongong
NSW, Australia
most auto service and some electricans can scan faults,,you can buy scanners.i dont know if they will charge or not.my guys dont when i get the auto serviced,i have known him for years.muzza on this site sells them---i have 2 of them to pin point stuffed parts and save time and money,works on holdens.not the scanner,but codes to find stuffed parts.

 

_________________

R.I.P HANS HARTMAN
Top
 Profile  
 
 
87SIlude
 Post subject: Re: Power loss down low. Any Ideas.
Posted: Wed Apr 06, 2011 7:07 pm 
Getting Side Ways
Offline

Age: 33

Posts: 1109

Joined: 4th Sep 2009

Ride: 92 EB s

Location: DORRIGO
NSW, Australia
Blown head gasket.
Bet ya.
Top
 Profile  
 
 
Parfie_96falcon
 Post subject: Re: Power loss down low. Any Ideas.
Posted: Wed Apr 06, 2011 8:01 pm 
Oompa Loompa
Offline

Age: 31

Posts: 31

Joined: 21st Jan 2010

Gallery: 4 images

Ride: Ford Ef Falcon

Location: Clermont
QLD, Australia
87SIlude wrote:
Blown head gasket.
Bet ya.

but wouldnt it be over heating if i have blown a headgasket?
Top
 Profile  
 
 
hans hartman
 Post subject: Re: Power loss down low. Any Ideas.
Posted: Wed Apr 06, 2011 11:10 pm 
Getting Side Ways
Offline

Age: 73

Posts: 2542

Joined: 18th Mar 2006

Ride: EF-XR8chaser

Location: wollongong
NSW, Australia
87SIlude wrote:
Blown head gasket.
Bet ya.

HOW MUCH? NEED SOME BEER MONEY FOR 100 GUYS-PISS POTTS :lol: :lol: :lol:

 

_________________

R.I.P HANS HARTMAN
Top
 Profile  
 
 
hans hartman
 Post subject: Re: Power loss down low. Any Ideas.
Posted: Wed Apr 06, 2011 11:23 pm 
Getting Side Ways
Offline

Age: 73

Posts: 2542

Joined: 18th Mar 2006

Ride: EF-XR8chaser

Location: wollongong
NSW, Australia
DO THE SCANS FIRST-my vn runs like crap when i blow the map sensor.check yours and vacuum leaks-spray aero start around the manifold and vacuum lines,it will rev fast with extra fuel.will lose water,pressurize the tank,overheat or if blow between cylinders,have 2 pistons on low compression.have to start some where-----1 scan,2 spray for leaks.3 water carbon test-radiator joint,4 compression test. you may find it in the first 4.

 

_________________

R.I.P HANS HARTMAN
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 1 of 1  [ 10 posts ] 
Jump to:  

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Who is online

Users browsing this forum: Google Adsense [Bot] and 81 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Nov 26, 2024 3:38 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names