|
4.9 EF Futura |
|
|||
|
stomper wrote: i use the DEX III that dad got for his commie. 1L cost about 15$ and im sure its sutable for the Trannie.
For a holden tranny - yes. Dont go putting that in a Ford BTR transmission tho!!!
_________________ I promise..... I will never die. |
|||
Top | |
Walkinshaw |
|
||
|
4.9 EF Futura wrote: stomper wrote: i use the DEX III that dad got for his commie. 1L cost about 15$ and im sure its sutable for the Trannie. For a holden tranny - yes. Dont go putting that in a Ford BTR transmission tho!!! EXACTLY why the dipstick was removed
_________________ Soo many idiots. So few bullets |
||
Top | |
msman |
|
||
|
Interceptor wrote: madmax wrote: mobilfluid 424 is a hydraulic oil that is not suitable for auto trans systems therefore it is not compatible with dextron based products. IIRC the spec was changed to mobilfluid 424 to reduce pump wear and noise. You will need to be absolutely sure you have a dextron based fluid in the PS before topping it up with the castrol fluid you have bought. Otherwise you will need to do a full flush of the PS. ok then, how would you go about flushing the power steering system to go from dex 3 to 424? i'd also like to know if there is a procedure to follow. when i chenaged the ps fluid when the car was bought i just syphoned the ps pump and topped it off, and repeated 4 times with week inbeteen each change.
_________________ why do u write in here. |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 48 guests |