putting in new head and cam on weekend by myself im no mechanic lol but im gonna give it a shot lol new head and cam i bought off need for speed this wat im putting on

Description:
-Head was reco'd
-Pressure tested
-K-Line valve guides (I don't know what this is, it's written on the invoice)
-Head has been O-Ringed (no more headgasket problems!)
-Back cut valves
-Top cut valve seats
-Crane 99957 multigroove retainers
-Upgraded valve springs
-Wade 1636 cam
-New valve stem seals
-Has some slight port work done just behind the valves

The head comes with a receipt, head work cost just over $900, and the cam was extra so over $1000 worth of work. Was all done by Pavtek.


let me know wat u guys think and any advice is welcome

if you have exhaust mods, id be throwing in a bigger cam,

i have lukey extractors hi flow cat 2.5 inch system all through cam come wit head and better than stockie i have and at moment will be fine till i fix outside of car up lol i would put pics up but am unable to due to the fact i dont kno how to make them fit on here lol

go to this link and download the thing that says 'image resizer"

http://www.microsoft.com/windowsxp/down ... rtoys.mspx

next install this on the pc (should take 30 secs as its a tiny program)

once thats installed go to any pics you would like to upload and right click..there should now be a 'resize image' option. do this and u should now have a small kb but still viewable photo.

next go to http://imageshack.us/ and upload the photo you just resized. Once its been uploaded image shack will give u a link. copy paste this link into your post and your done.

let hope this works thanks for ure help http://img339.imageshack.us/img339/8590/img0669small.jpg

kk well any advice