|
| CHEF |
|
|||
|
I've done it up as tight as, and put on a new belt, but at high revs/load it jumps off...
Any ideas why this is happening? |
|||
| Top | |
|||
| ReGiE |
|
|||
|
this was happening to mine.
i changed the idler pulley and it fixed it i think they are 30 bux or so from fraud
_________________ Gooooone - Eb2 Coon - 143RWKW |
|||
| Top | |
|||
| CHEF |
|
|||
|
Ah cool, I'll try a new one.
thanks mate |
|||
| Top | |
|||
| ReGiE |
|
|||
|
no worries
the bearings were shot in my idler pulley so there was a bit of movement side to side on the pulley.
_________________ Gooooone - Eb2 Coon - 143RWKW |
|||
| Top | |
|||
| eb six on boost |
|
|||
|
mine did the same years back, got a belt the next size smaller.
had to leaver it on the pully it was so small. hense it never came off again.
_________________ 777rwkws on 39psi with an old eb sohc, going for 7s........... |
|||
| Top | |
|||
| smoke_ |
|
|||
|
my ed did this.
the belt was worn more on one side. i replaced it and it's never fallen off since. the other thing to take note of if the belt is sitting perfectly straight.
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| EB on boost |
|
||
|
I would check the belt hasnt stretched or the idler bearing worn...
|
||
| Top | |
||
| CHEF |
|
|||
|
Well, just put a new belt and pulley and it still came off... maybe it needs a new pulley on the pump?
|
|||
| Top | |
|||
| mreb |
|
|||
|
maybe check the balancer could be worn with the extra power you got.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 92 guests |
12.06@120MPH