|
| millard455 |
|
|||
|
hi all,
my girlfriends BA XT 4.0L has developed a rattle sound and I'm sure its coming from inside the rocker cover right at the front of the engine  it only happens once the car has been running for a while and only under about 1100rpm. the noise doesn't seem to get faster with engine revs like a tappet noise in fact it goes away when you bring the revs up but as soon as you get of the gas the noise is there again. there is no rattle on cold start up what so ever and doesn't start until engine is nice and warm. what the hell has gone wrong? the car has only travelled an easy 50,000km and been serviced every 5000km. anyone have any ideas whats gone wrong? thanks heaps.
_________________ EL XR8 SERIES 2, 5SPD, HOT CHILLI RED, 200 ODD RWKW OF V8 FUN AND GAMES |
|||
| Top | |
|||
| splosh123 |
|
||
Age: 34 Posts: 168 Joined: 3rd Dec 2009 Ride: Falcon EL Option 20 Location: Redcliffe, Brisbane |
Sounds like the timing chain. You could take the rocker cover off though and see if anything looks out of the ordinary though?
Cheers Josh |
||
| Top | |
||
| Johnson stroker |
|
|||
|
Possibly a chain guide or the chain tensioner?
Could also be a heat shield or even something along the serp belt or accessory? Stabs in the dark, but who knows. Long screw driver to your ear may help diagnose it. Location wise that is. a big hammer should fix it.
_________________
|
|||
| Top | |
|||
| millard455 |
|
|||
|
my first thoughts were a timing chain guide or tensioner but wouldn't it rattle when its cold as well, not just when its hot?
the rattle is definitely in the right place to be the timing chain  but why would it only be doing it when the engine is hot?
_________________ EL XR8 SERIES 2, 5SPD, HOT CHILLI RED, 200 ODD RWKW OF V8 FUN AND GAMES |
|||
| Top | |
|||
| phongus |
|
|||
|
millard455 wrote: my first thoughts were a timing chain guide or tensioner but wouldn't it rattle when its cold as well, not just when its hot? the rattle is definitely in the right place to be the timing chain but why would it only be doing it when the engine is hot? Oil is thicker when cold...maybe it is dampening the rattle? Once hot the oil becomes thinner and runs off the chain faster/flings off easier causing less cushioning? Just taking a stab here.
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| frd906n |
|
||
|
i have the exzact same problem, dosent sound anything like this does it
http://s649.photobucket.com/albums/uu21 ... eo0017.mp4
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| SiX_iN_a_RoW |
|
||
|
Sorry to dig up an old thread but did you ever find the cause of this noise?
_________________ Lets go find that Hotdog tree I planted |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 67 guests |
