|
| EL__Fairmont |
|
|||
|
Well the coil on the EL shat itself 2 days ago in the driveway(very lucky). Diagnosed the fault in about an hour. I first checked for spark-no spark, checked for signal from TFI module(yes). Then swapped over coil with an old EA coil i had spare in the shed, Started first go. Although I went out and bought a new bosch coil as this old spare one has 2 hairline cracks in it.
My question is where else can you mount them besides the current position where they can get wet from puddles etc and heat from engine. I know the saloon cars mount them somewhere else. Any idea's. Also would it matter if a ran a longer coil lead. Say upto 8kohm resistance compared too the factory short lead which measures 4kohm resistance. Cheers...........
_________________ 97 EL Fairmont 4l OHC .Silver. |
|||
| Top | |
|||
| madeaspack |
|
||
|
mines on top of the chassis rail under the air intake
_________________ 97 el xr6,5 speed short shifter,sequential scoop,no arial,freshly resprayed,low on 17's,3 inch zorst,stainless hi flo cat,snort stage 3 stainless manifold,garrett t04e,front mount cooler,wolf 3d ecu,seimens 760cc injectors,walbro fuel pump |
||
| Top | |
||
| DA22LE |
|
|||
|
Biggest drama is extending the wires. Get this sorted an you can pretty much mount it wherever takes your fancy.....I bought an aftermarket coil (cant remember the name), and car starts easier than before..
Cheers Daz 
_________________ BA XR8 Boss 260 |
|||
| Top | |
|||
| EL__Fairmont |
|
|||
|
DA22LE wrote: Biggest drama is extending the wires. Get this sorted an you can pretty much mount it wherever takes your fancy.....I bought an aftermarket coil (cant remember the name), and car starts easier than before..
Cheers Daz I have just finished extending the loom but I am just wondering about the coil lead length and lead resistance.(longer the lead the higher the resistance)? Should it make much difference?
_________________ 97 EL Fairmont 4l OHC .Silver. |
|||
| Top | |
|||
| data_mine |
|
|||
|
When I changed to a Fireball ignition in my EL, I had it mounted to the strut tower.
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
| Top | |
|||
| el_xr6_luke |
|
|||
Age: 38 Posts: 412 Joined: 21st Aug 2006 Ride: EL XR6, Blueprint, Turbo Location: Melbourne |
Is there any benefit of getting a different coil, mine has f**k up twice now and im just waiting for it to do it again.
anybody got pics of there aftermarket coil setup? |
|||
| Top | |
|||
| data_mine |
|
|||
|
This is the kit I stuck in my EL. Didn't do much for power, but increased torque a bit, and improved economy. Mind you it was really bad before hand, and bad afterwards (big cam).
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
| Top | |
|||
| BenJ |
|
||
|
hmmmmm, I like the look of that.
Are there any other recommended aftermarket ignition coils? BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| data_mine |
|
|||
|
That coil needs the ignition module too.
They make one that'll run from the regular ignition system, it's got a different model#. Can't remember it off the top of my head - it's been years.
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
| Top | |
|||
| EL__Fairmont |
|
|||
|
Well I ended up mounting the ign coil in front of the airbox. Good spot to stay cool and dry!!
_________________ 97 EL Fairmont 4l OHC .Silver. |
|||
| Top | |
|||
| fiftyone |
|
|||
|
could just drill two holes in to the airbox and run bolts through that. just that you'd need an earth strap to bolt it to
_________________ ** For Sale ** http://www.fordmods.com/ford-parts-for-sale-f17/assorted-e-series-parts-t124697.html |
|||
| Top | |
|||
| -GAS-MAN- |
|
|||
|
The existing cables reach?
Or did you use an old spark lead to get a longer reach? I thought of doing this ages ago too, but i was too lazy 
Good on you!
_________________ it can be fast and cheap,but it wont be reliable |
|||
| Top | |
|||
| EL__Fairmont |
|
|||
|
-GAS-MAN- wrote: The existing cables reach?
Or did you use an old spark lead to get a longer reach? I thought of doing this ages ago too, but i was too lazy Good on you! I used a spark lead from spares I had in my shed (topgun 8mm lead from a 3.9lCPI engine). Factory lead is only about 20cm and the lead i am using is about 40cm. Car is accelerating alot better up hills and starting better since fitting the new coil. Cheers..........
_________________ 97 EL Fairmont 4l OHC .Silver. |
|||
| Top | |
|||
| DA22LE |
|
|||
|
el_xr6_luke wrote: Is there any benefit of getting a different coil, mine has f**k up twice now and im just waiting for it to do it again.
anybody got pics of there aftermarket coil setup? Mine, but since moved a bit..... 
Benefits....YES......the heat and vibration wont f**k it again.......... Daz
_________________ BA XR8 Boss 260 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 110 guests |
