|
| Blazing EF |
|
||
|
hey guys
ive removed all the bolts from my intake manifold but it still wont come out is there something im missing? |
||
| Top | |
||
| phongus |
|
|||
|
Did you remove the 2 bolts that hold the BBM to 2 rods to help support the BBM? They should be found underneath the BBM, one at the front and one at the back. the one at the front is easy to get to, but the back bolt is touch and go.
Good luck. phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| low_ryda |
|
|||
|
sometimes they just need a good love tap to get them off the head to.
_________________ Not to get technical, but according to chemistry alcohol is a solution. |
|||
| Top | |
|||
| Blazing EF |
|
||
|
its off the head its just i cant get it out of there. i will check underneath for these supporting bolts
|
||
| Top | |
||
| low_ryda |
|
|||
|
deffinately that bastard bracket underneath then.
_________________ Not to get technical, but according to chemistry alcohol is a solution. |
|||
| Top | |
|||
| Gavsed |
|
|||
|
make sure all the hoses are disconnected and the bbm are removed
_________________ EF XR6 WGN LOWERED FG 19' XR6T RIMS SOUND SYS, 2 1/2' EXAUST |
|||
| Top | |
|||
| Blazing EF |
|
||
|
ok i cant find the bracket at the back of it, where abouts is it?
|
||
| Top | |
||
| Blazing EF |
|
||
|
any1 know how to get the bottom bracket off cause i cant see it i dont know what im looking at
|
||
| Top | |
||
| phongus |
|
|||
|
Blazing EF wrote: ok i cant find the bracket at the back of it, where abouts is it?
It is similar to the front one. If you run your hand underneath the BBM through the gap between the firewall and BBM, you should be able to feel for it somewhere. It's location is similar to the front, just in reverse. The bolt faces the firewall, so if you do end up finding it, it'll be a b**ch trying to get the spanner on it. phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| relaxed_diplomacy |
|
||
|
Lie on your back and poke your head under the car behind the left front wheel and move towards the front a bit and look up. There is a significant cavity there between the crossmember and firewall.
_________________ wrecking 9/97 EL fairmont sedan burgundy 6cyl auto 270k modBAintake |
||
| Top | |
||
| Blazing EF |
|
||
|
ok ive found where the bolt is but cant get to it for the life of me. if i remove the fuel rail i think i can get to it but how do u get the fuel rail off? ive unbolted the 4 bolts that hold it on but i cant get the injectors out?
|
||
| Top | |
||
| phongus |
|
|||
|
Blazing EF wrote: ok ive found where the bolt is but cant get to it for the life of me. if i remove the fuel rail i think i can get to it but how do u get the fuel rail off? ive unbolted the 4 bolts that hold it on but i cant get the injectors out?
Injectors are probably stuck in there, If you pull the injectors out you might want to replace the seals while you're at it...just in case the old ones are ripped apart when you pull them out. The only way I could get the rear bolt off is by using a 10mm spanner and then feel for the bolt to slot the spanner on with one hand...the other hand is to hold the spanner once it is hooked onto the bolt. It is easiest if you have one of them ratchet spanner kits...those things are a life saver. phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 123 guests |
