|
| Tocchi |
|
|||
|
about 2 years ago i had a minor fire underneath my bonnet, causing fire damage to the heatproofing under bonnet.
Also an engine issue (hole in timing cover) causing oil to be sprayed everywhere in engine bay, causing the heatproofing to be quite oil soaked. It is also kind of torn. my question is, does a straight 6 (ED motor) produce enough heat to cause the paint to peel and bubble on the bonnet (top side and engine bay side) if there isnt heatproofing? there's a pic of the heatproofing damage (barely in the pic though) in one of the engine bay pics in my gallery |
|||
| Top | |
|||
| snap0964 |
|
|||
|
My XH came from the factory without the underbonnet heatproofing. After 10 years, there's no sign of any heat damage to the underbonnet (it hasn't been resprayed, etc).
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| gate_21 |
|
||
|
took my heatproofing off about a year ago because it was all ripped and looking ugly...no sign of damage to the paint yet...gets a lil hotter than before but not too much
|
||
| Top | |
||
| Tocchi |
|
|||
|
thanks for that. just what i wanted to hear.
|
|||
| Top | |
|||
| vibr8n |
|
|||
|
my cars been goin for eons before i bought it without any bonnet lining due to the cosworth vents.
i've done 20,000k's & the only blemishes on my bonnet are from violently snapped engine mounts.
_________________ crow cam,cai,exaust,bbm,190 reg & el injectors,xr6 interior,guages,white cluster,pioneer/mtx stereo,big boot install w.i.p, 17"rims,koni/pedders shocks&springs with nolathane re-bush,ssv kit,stainless inserts,clear lights,t5 & short shifter,chardonay/pearl paint |
|||
| Top | |
|||
| cjh |
|
|||
|
EF & EL XR6's didn't have the bonnet heat sheilds, but the XR8's did.
It was one way or the other, its been awhile since i looked at them when they were new.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| twase |
|
|||
|
I believe it is sound deadning not heatproofing, you want the heat out not keep it in.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| cjh |
|
|||
|
Yeah, both, i'd settle for both. The AU I had none, but the AU II had it, as well as a sandwich type firewall too, like steel-polyurethane-steel. So if you cut one with an oxy or plasma cutter, watch it spit and carry on.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| vibr8n |
|
|||
|
& suck in that agent orange...
polyurethane is produced using iso-cyinate, when burnt gives you agent orange. the stuff they used for chemical warfare in vietnam. good stuff.
_________________ crow cam,cai,exaust,bbm,190 reg & el injectors,xr6 interior,guages,white cluster,pioneer/mtx stereo,big boot install w.i.p, 17"rims,koni/pedders shocks&springs with nolathane re-bush,ssv kit,stainless inserts,clear lights,t5 & short shifter,chardonay/pearl paint |
|||
| Top | |
|||
| rushed |
|
|||
|
^ lol
1 year mines been running without the furry thing, got a lil louder, and a lil hotter. no paint damage yet, dont care as the bonnets not that good neway |
|||
| Top | |
|||
| daggy082 |
|
|||
|
vibr8n wrote: & suck in that agent orange...
polyurethane is produced using iso-cyinate, when burnt gives you agent orange. the stuff they used for chemical warfare in vietnam. good stuff. LOL who told u that????
_________________
|
|||
| Top | |
|||
| 4.9 EF Futura |
|
|||
|
vibr8n wrote: & suck in that agent orange...
polyurethane is produced using iso-cyinate, when burnt gives you agent orange. the stuff they used for chemical warfare in vietnam. good stuff. Would suck to be a tree!!
_________________ I promise..... I will never die. |
|||
| Top | |
|||
| Happy |
|
|||
|
that sheilding is there not so much for heat proofing but for sound proofing, same way the futuras and above have it on the firewall
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 49 guests |
