Hey all, How do i replace the 120a Main Fuse in the falcon.. didn't realise that you couldnt unplug it like normal so when yanking at it... the row of fuses all came out.. now I don't know if that would normally happen to get to them but i cant seem to pull it out any further to get to the screws that i think are holding the main fuse in..

Any help?

Really need to get my car back on the road!

Cheers
Phil.

usually you unbolt the fuse holder and open the two plastic covers on either side and remove the two bolt's holding the main fuse in. Then it pulls out.

Hey,

Ok i got the main fuse out but then realised the new fuse from repco i got isn't the right one, the ford one is larger then the one repco gave me so I went to autobarn and no go there either..


Any other place you can find a new fuse? or just ring local ford dealer?

or buy a second hand one off the wreckers?

go to pick n' pay, pay your dollar to get in a pinch one out of a wreck.
Or try a narva dealer.

got one off ford... $20.. bit steep but brand new......


now to relace the plug to the alternator