|
| alfy |
|
|||
|
ive got a strange one for yas...
i thought EA-ED rev limits were set at 5400rpm, right? i pulled out infront of a car accidently today and had to give it to my EA, and i held it all the way to 5400.... only to discover it happily kept going until fuel cut out at 6000rpm 
did some EA-EDs have a raised limiter or something? or is my car electronically f**k? lol
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| ReGiE |
|
|||
|
mine doesnt have a limiter. ive taken it just about 6000 and no cutout..didnt want to go any further though
_________________ Gooooone - Eb2 Coon - 143RWKW |
|||
| Top | |
|||
| DoddEA |
|
||
|
My old EA pushed well into the late 5000's...
|
||
| Top | |
||
| eed-250 |
|
||
|
as far as i know most ea's and early eb's didnt have them.
My ed used to have one at 5700rpm. |
||
| Top | |
||
| alfy |
|
|||
|
i know mine has one, and its a series one EA, because it gets to it and then it does what a rev limiter does lol, and cuts fuel momentarily.
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| akademiks |
|
|||
|
its called inertia the needle probly goes past where its meant to if you bounce it off the limiter it will drop back down
|
|||
| Top | |
|||
| wicksy |
|
|||
|
speed limiters come out in series 2 ebs didnt they or the late ones?
_________________ Now i have a EF XR8 5spd.........mmmmmm 5L |
|||
| Top | |
|||
| raff-26 |
|
|||
|
I have wound out my wagon off clock(goes 200k's on clock) but rev's still pulled. Mate has AU Fairymont, thats on 180km'h limited
_________________ EF Ghia 5L V8 |
|||
| Top | |
|||
| Mitch_ |
|
|||
Posts: 6168 Joined: 5th Nov 2004 |
ummmm...pretty sure we're talking rev limiter.
ef's have them at 5800, i've hit it once or twice accidentally.
_________________
|
|||
| Top | |
|||
| raff-26 |
|
|||
|
Mitch_ wrote: ummmm...pretty sure we're talking rev limiter.
ef's have them at 5800, i've hit it once or twice accidentally. ummmmmm yeah.....EB'S dont have rev limiters, go to 6000rpm, but any person with respect for their car*unless built for it* knows 4,500-5,000 is more then enough its not a revving engine. Torque is the key...
_________________ EF Ghia 5L V8 |
|||
| Top | |
|||
| edfairmont4.0 |
|
|||
|
my mates EA fairmont ghia is limited at 5400 my other mates old EA S pak series 1 was Rev limited at 5400 as well... my EB fairmont was limited at 5400. ED 5700 EL efi
_________________ ED Fairmont, Ghia mock DOHC-T 11.6 @ 118 Trying to get back to the 1/4! |
|||
| Top | |
|||
| bushman |
|
|||
|
i thought ef's were rev limited ar 6250
_________________ THE LOOSEST MUTHA FUKA YOU'VE EVER MET |
|||
| Top | |
|||
| dsheps83 |
|
|||
|
i had an early EB series 2 it never had a rev limiter or speed limiter or smartlock
|
|||
| Top | |
|||
| edfairmont4.0 |
|
|||
|
lucky buggers! i wish my rev limiter was non-existant.
_________________ ED Fairmont, Ghia mock DOHC-T 11.6 @ 118 Trying to get back to the 1/4! |
|||
| Top | |
|||
| justfordima |
|
|||
|
There was alot of variation with the earlier rev limiters. The figure was meant to be set to 5100RPM for EB series (6 cyl).
For the later ECUs they got a 5700 rev limiter. In the V8's you will see the common EF/EL ECU having a rev limiter cutting revs at 6200 releasing the limiter when it falls back to 6100. The XR8's and the like were set to cut at 8000 and come back to 7500 before been released. Before people bounce up about the numbers - any ECU can have any numbers, I'm just talking about the majority of the ecu population. Cheers, justfordima
_________________ ;++JustForDimSim++;
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 39 guests |
