|
| fatnsticky |
|
|||
|
using an au steel head gasket on an ED, do u use sealant as well or does it go on dry, thanks
_________________ If u can't fix it with a hammer, it's an electrical problem |
|||
| Top | |
|||
| nannas_ed |
|
|||
|
head gasket itself goes on dry (no sealent) but its critical that the mating surfaces are clean and that there are no high spots from bits of the old gasket. you can how ever use a little silicone gasket maker on the timing cover gaskets and "c" seal
_________________
|
|||
| Top | |
|||
| green car |
|
||
|
Ford recommend that you use hylomar spray on the au head gasket,so do alot of people on here.
I used the hylomar spray when i fitted mine. Its about 10 bucks a can roughly, i think the brand i got was ACL. Better to be safe than sorry.
_________________ 165 Killer Wasps all packaged in a green kmart car, almost an explorer in a way... |
||
| Top | |
||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
no real need for any sealer. how ever, ACL hylomar or VHT copper gasket spray will not hurt
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 79 guests |
