Fordmods Logo

Shaking on idle in D 

 

Page 1 of 2 [ 24 posts ] Go to page 1, 2  Next

 
 Post subject: Shaking on idle in D
Posted: Tue Nov 09, 2004 11:14 pm 
Stock as a Rock
Offline
User avatar

Age: 41

Posts: 113

Joined: 7th Nov 2004

Ride: EF

Location: Perth
WA, Australia

Hey everyone,

My EF (auto) is shaking due to low idle when the transmission is on drive. It happens only when im stopped at the lights. The funny thing is when its on neutral, park or even reverse it sits perfectly.

I've had my injectors cleaned and car recently serviced, i even had the idle raised slightly but it didnt help..

Any ideas?

 

_________________

EF II I6
Exterior: Custom Mustang Kit
Interior: 2 x Kicker L7 12" & ZR1000
Engine: Wade cam, extractors, 2.5" exhaust.. heaps more on its way

Top
 Profile  
 
 
Posted: Tue Nov 09, 2004 11:21 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 2975

Joined: 5th Nov 2004

Ride: BF Typhoon

Location: Melbourne
VIC, Australia

im guessing its nothing to do with your plugs/leads/idle. more something like driveline/engine or tranny mounts..
Someone with more experience wanna have a guess?

 

_________________

BF Typhoon, Dejavu - 6sp Auto, Leather, Sunroof, 19"s, Electric Pedals, Tint, FPV Sports Wheel, FPV Mats.

Top
 Profile  
 
 
Posted: Tue Nov 09, 2004 11:58 pm 
Smokin em up
Offline

Age: 38

Posts: 204

Joined: 6th Nov 2004

Gallery: 2 images

Ride: EL Futura

Location: Kurri Kurri
NSW, Australia

yep engin mounts...Theres 2 at the front of a EL EF...they r f**k hard as to get off tho...one is near ur dizzy on the passenger side...dont bother trying...and the other that is easy to get to is on the right near your exhaust...which basically means ur oxy cutting off the retaining bolts cos its fully rusted and near impossble to get off. Ive got the parts to do mine but didnt think about how hard it would be to actually remove them...hence mine still shakes while in drive.
Top
 Profile  
 
 
Posted: Wed Nov 10, 2004 1:44 am 
Stock as a Rock
Offline
User avatar

Age: 41

Posts: 113

Joined: 7th Nov 2004

Ride: EF

Location: Perth
WA, Australia

hmm engine mounts.. ill look into it, thanks for that

this may be a dumb q but how would engine mounts make my car shake on drive?

 

_________________

EF II I6
Exterior: Custom Mustang Kit
Interior: 2 x Kicker L7 12" & ZR1000
Engine: Wade cam, extractors, 2.5" exhaust.. heaps more on its way

Top
 Profile  
 
 
Posted: Wed Nov 10, 2004 2:03 am 
Technical Contributor
Offline
User avatar

Age: 40

Posts: 5855

Joined: 5th Nov 2004

Gallery: 8 images

Ride: '95 EF's

Location: Leederville
WA, Australia

sorry to be off topic, but ruthless - what is the kit you've got on your car?? i think you need to come to the cruise on the 14th and show us all your ride! :P

 

_________________

R.I.P. Scotty

Top
 Profile  
 
 
Posted: Wed Nov 10, 2004 2:44 am 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 2450

Joined: 5th Nov 2004

Gallery: 1 images

Ride: NL V8 Fairlane

Location: Sydney
NSW, Australia

Can't be the engine mounts, you'd feel it in all gears. I am thinking the gearbox may need to be serviced.. Are there any visible leaks etc? Also, go into more detail about the idle quality.. Make sure everything is attached properly, or even better, go back to the mechanics who did the injectors to fix the problem for you.

 

_________________

There are 10 types of people in this world.
Those who know binary and those who don't.

Top
 Profile  
 
 
Posted: Wed Nov 10, 2004 4:26 am 
Stock as a Rock
Offline
User avatar

Age: 41

Posts: 113

Joined: 7th Nov 2004

Ride: EF

Location: Perth
WA, Australia

uglybob: its a custom kit, it was made by taking the moulds off a mustang cobra and making it suit an EF, ended up looking awesome. ill take some pics and post em up soon & definately try make it for the cruise!

drone: Gearbox and trans recently serviced, no leaks for sure.. Idle quality in all other gears cept drive is smooth and revs are constant. When its in drive, revs go about 100rpm lower than the rest of the gears do, when i move my steering wheel the revs jump a bit and the shakes stop for a brief second(which is a good sign). If i manually hold brake with one foot, and have accel on slightly to raise it the extra 100rpm it goes smooth again.

I'll definately get my mechanic have a good look, but i thought i'd get a heads up from someone who possibly had a similar prob and could save my mechanic spending a lof of time (and my money :p)

thanks again guys

 

_________________

EF II I6
Exterior: Custom Mustang Kit
Interior: 2 x Kicker L7 12" & ZR1000
Engine: Wade cam, extractors, 2.5" exhaust.. heaps more on its way

Top
 Profile  
 
 
Posted: Wed Nov 10, 2004 9:38 am 
Technical Contributor
Offline
User avatar

Age: 40

Posts: 5855

Joined: 5th Nov 2004

Gallery: 8 images

Ride: '95 EF's

Location: Leederville
WA, Australia

i think voxace had the same sort of an issue - he disconnected his power steering sensor, and it all went back to normal... maybe give him a shout and ask him what his problem was and how he fixed it?

hehe see you on the cruise then! :P

 

_________________

R.I.P. Scotty

Top
 Profile  
 
 
Posted: Wed Nov 10, 2004 10:05 am 
Getting Side Ways
Offline
User avatar

Age: 43

Posts: 8655

Joined: 5th Nov 2004

Gallery: 37 images

Ride: V8 EF Futura

Location: Adelaide CBD
SA, Australia

Harmonic balancer may be on its way out.

It may be that putting in D reduces idle to a point where the balancer is not balanced. In N or P it may be that the higher revs are providing enough centrifugal force to make the balancer balanced...

 

_________________

I promise..... I will never die.

Fordmods Administration Group MINOR PUNKED

Top
 Profile  
 
 
Posted: Wed Nov 10, 2004 1:47 pm 
Smokin em up
Offline
User avatar

Age: 41

Posts: 263

Joined: 7th Nov 2004

Gallery: 1 images

Ride: BA II XR6 Turbo Ute & XH Ute

Power: 295 rwkw

Location: Skye
VIC, Australia

i have the same problem!!! except mine has got gradually worse and has started to effect idle in all gears! but not as much as when its in drve!

ive changed the harmonic balancer the fuel pump the fuel filter and the injectors and it still happens! and ive hada look at the engine mounts and they dont move excesivly either!
so any other suggetions

 

_________________

~Such Is Life....
EL Fairmont Ghia: lowered suspension , TIKFD custom plates, 20x8.5 XHP Shoreline, soon to have: JVC head unit, Eclipse speakers, Alpine and Sony Amps, 2x JL Audio 12w3v2 subs

Top
 Profile  
 
 
Posted: Wed Nov 10, 2004 1:57 pm 
Smokin em up
Offline
User avatar

Age: 38

Posts: 259

Joined: 5th Nov 2004

Gallery: 6 images

Ride: XRGLi EF

Location: Perth
WA, Australia

most likely engine mounts.. the EF ones are s**t and alot of people with EFs will start to get this problem around now... the car will shake to s**t in drive gear... but should not shake in nuetral.... if this is the case then ur engine mounts are most likely fukt.... most probably only one of them so check which one it is hopefully its the exhaust manifold side..... LOL... the otherside is a b**ch to remove.... If its both then i would replace them with the rubber sort out of an EL

 

_________________

BA XR8 manual ute black

Top
 Profile  
 
 
Posted: Wed Nov 10, 2004 4:03 pm 
Smokin em up
Offline
User avatar

Age: 41

Posts: 263

Joined: 7th Nov 2004

Gallery: 1 images

Ride: BA II XR6 Turbo Ute & XH Ute

Power: 295 rwkw

Location: Skye
VIC, Australia

mine is not the engine mounts! me and the other mechanic at work checked them out yesterday and there was no excessive movement in them

 

_________________

~Such Is Life....
EL Fairmont Ghia: lowered suspension , TIKFD custom plates, 20x8.5 XHP Shoreline, soon to have: JVC head unit, Eclipse speakers, Alpine and Sony Amps, 2x JL Audio 12w3v2 subs

Top
 Profile  
 
 
Posted: Wed Nov 10, 2004 4:57 pm 
Oompa Loompa
Offline
User avatar

Posts: 37

Joined: 7th Nov 2004

Ride: push bike

Location: springfield
QLD, Australia

TickfordGhia wrote:
mine is not the engine mounts! me and the other mechanic at work checked them out yesterday and there was no excessive movement in them
being a mechanic and not being able to fix the problem i think your in trouble,will send millhouse and nelson around to investgiate the problem.

 

_________________

i'm bart simpson who the hell are you?

Top
 Profile  
 
 
Posted: Wed Nov 10, 2004 4:59 pm 
Smokin em up
Offline
User avatar

Age: 38

Posts: 259

Joined: 5th Nov 2004

Gallery: 6 images

Ride: XRGLi EF

Location: Perth
WA, Australia

Did u use a pinch bar to check them??????
sometime the sache collapses in the mount itself but will still be stiff and will sit on the chasis and vibrate... you wont be able to shake them by hand

 

_________________

BA XR8 manual ute black

Top
 Profile  
 
 
Posted: Wed Nov 10, 2004 5:54 pm 
Technical Contributor
Offline
User avatar

Age: 37

Posts: 963

Joined: 8th Nov 2004

Gallery: 4 images

Ride: Liberty MY04 4GEN Luxury

Location: Melbourne
VIC, Australia

My brothers AU does this too.

Hes gonna get it checked out at next service.

 

_________________

www.lukehimself.net

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 2  [ 24 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: Google [Bot] and 96 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Nov 24, 2024 5:42 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names