|
| kissy |
|
||
|
I'm just about to get a 1634 wade cam in my EFII, I was just wanderind if any1 knows the ford part number for the shims coz my ford dealer cant find them and said that he needs a part number?
I was also toying with the idea of using stainless steel washers insteed as it would only cost $3!!! Does an1 know what size shim the EFII uses??? Thanks
_________________ EFII Fairmont, Low king springs, F1 tint, rebuilt motor, AU XR8 intake, Pacemaker Race Series extractors, 2 1/2" zorst, "free flow cat". Currantly concidering a wade cam!!!
|
||
| Top | |
||
| chunkz |
|
|||
|
is that same as shim valve tap???
ED-6K514-A SHIM VALVE TAP EF 4.0L I6 nfi if i know
_________________
|
|||
| Top | |
|||
| voxace |
|
|||
|
I used shims, but honestly it probably doesn't matter all that much if you use washers - as long as they are strong.
|
|||
| Top | |
|||
| kissy |
|
||
|
Umm... I dont no...
_________________ EFII Fairmont, Low king springs, F1 tint, rebuilt motor, AU XR8 intake, Pacemaker Race Series extractors, 2 1/2" zorst, "free flow cat". Currantly concidering a wade cam!!!
|
||
| Top | |
||
| twr7cx |
|
|||
|
voxace wrote: I used shims, but honestly it probably doesn't matter all that much if you use washers - as long as they are strong.
And the right size! I'm pretty sure I posted up the aprt number sometime when i was doing mine. but i also added it to the FordMods.com part database, so go have a look in there! (you can find it in the left colum on the homepage). browse through the parts, click the edit button in Internet Explorer, select find, and do a search for shim. it'll come up with the part number (or just look at chunkz post above as I'm pretty sure that's the right one). |
|||
| Top | |
|||
| kissy |
|
||
|
Yep that part number was the right one, there gonna cost me $3.50 each. Or i just might go to the wreckers and buy the whole rocker assembly.
_________________ EFII Fairmont, Low king springs, F1 tint, rebuilt motor, AU XR8 intake, Pacemaker Race Series extractors, 2 1/2" zorst, "free flow cat". Currantly concidering a wade cam!!!
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 63 guests |
