|
| mynads |
|
||
|
WTF would cause a plug to be so f**king tight as to the point of snapping on removal?(i swear it was the in law & not me)
|
||
| Top | |
||
| twase |
|
|||
|
Lack of anti seize when it was installed. Seek professional help in removing it as you don't want to fill the cylinder up with broken insulator.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
or improper use of spark plug tool, if the rubber grommet inside the tool is missing the plugs can snap
_________________ RIP SCOTT |
|||
| Top | |
|||
| badkiwi |
|
|||
|
i always take out hot. i did once cold and rounded of edges so have always changed plugs on warm/hot engine
|
|||
| Top | |
|||
| PIMP_LTD |
|
||
|
I recently had this happen on my drift cars engine. It all ended in tears as after the top of it snapped off, i decided to call the meet a day and load it on the trailer.
While doing so, the centre of the plug dropped into the engine and f****d it. Expensive exercise. Also, i tried getting it out hot, and thats when it snapped. Professional help as said is the best, otherwise its a head off job. ALWAYS use anti seize!!!. Andrew.
_________________ Commodore australia's favorite car??? What a load of s**t |
||
| Top | |
||
| djcustomcomputing |
|
|||
|
I have never used anti-sieze. where do i get some? how much? and how do i use it? because i really dont want that to happen
_________________ MY BUILD THREAD |
|||
| Top | |
|||
| smiley235 |
|
|||
|
I've changed plenty of spark plugs on friends and families cars, and they have never snapped and I never used anti-sieze. Maybe people are overtightening them.
_________________ 178.3 rwkw
|
|||
| Top | |
|||
| Punnisher_42 |
|
|||
|
same here - never used or even heard of anti seize!!
my moto with plugs is never tighten them more than what you could do with a socket on the end of a screwdriver.
_________________ Regards, |
|||
| Top | |
|||
| djcustomcomputing |
|
|||
|
Punnisher_42 wrote: same here - never used or even heard of anti seize!! well im glad somones with me
my moto with plugs is never tighten them more than what you could do with a socket on the end of a screwdriver. i was about to run out and take my spark plugs out lol
_________________ MY BUILD THREAD |
|||
| Top | |
|||
| fnp |
|
|||
Age: 39 Posts: 4401 Joined: 25th Mar 2005 Ride: BA XT, BA XR6T, ED Ghia 5.0 Location: Perth |
Why would you need to make them so tight anyway, its a spark plug not the sydney harbour bridge.
_________________ What's the difference between a Holden and a sheep? It's less embarrasing getting out of the back of a sheep.. |
|||
| Top | |
|||
| PIMP_LTD |
|
||
|
I never over tighten mine, yet it happened.
Andrew.
_________________ Commodore australia's favorite car??? What a load of s**t |
||
| Top | |
||
| basstrom_dave |
|
||
Age: 37 Posts: 410 Joined: 27th Jul 2005 Ride: Mazda CX-5 & 96 EL Falcon Location: Adelaide |
only ever happened to me when the head gasket went car was only suited to wrecking then, and I didn't do it was the mechanic, if i knew what i know now would have been a different story, that said i only do them up to hand tightness, think in my workshop is has a certain tightness for them which I've done in the past always been good. check to see to that the threads on them are good and you don't cross thread them as you put them in.
|
||
| Top | |
||
| twase |
|
|||
|
From the official BA service manual.
Anti-Seize Compound Ford Spec. General SAM-1C-9107A or SAM-1C-9107A Spark plug threads ESE-M1244-A Torque 10Nm Interesting that the spark plug replacement procedure does not mention putting anti seize on them...
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| schnoods |
|
|||
|
fnp wrote: Why would you need to make them so tight anyway, its a spark plug not the sydney harbour bridge.
Hehe, the sydney harbour bridge is riveted and not bolted! I have caught my brother out overtightening them, He thought because it had to seal that a bit more wouldnt hurt.... Anti seize is good, but not necessary if you dont overtightend them.
_________________ Because of Beer, Thirst is a Beautiful Thing! |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 144 guests |
