|
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
makes sense
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| 87SIlude |
|
||
|
Haha.
Has the op attempted a fix yet. |
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
dunno ay
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| Shifteh |
|
||
|
ok so yesterday i went to sca and got some techaloy flush,techaloy gold ,(green) and another radiator cap
i chucked the new cap on and took it for a spirited drive and , i can hear the hot coolant in the pipes, no overflow leakages that must of done it , will be changing coolant if i feel well enough  ' thanks everyone who posted solutions
_________________ Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue |
||
| Top | |
||
| 87SIlude |
|
||
|
Well there ya go.
Good thing was only the cap. Do a coolant flush mate. Its easy as an oil change. |
||
| Top | |
||
| Shifteh |
|
||
|
speaking of oil change, engines just about to hit 1100kms since ive rebuilt it
i did the first oil change at 100kilometres \
_________________ Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue |
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
do another. better safe than sorry
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| Shifteh |
|
||
|
yeah i will shortly, took the rocker cover off the other month and dam it was clean as a nuns cu**
hopeing to keep it that way
_________________ Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue |
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
so in other words with the dumping coolant i guessed right?
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| Shifteh |
|
||
|
further tests required
_________________ Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue |
||
| Top | |
||
| Shen Long |
|
|||
Age: 49 Posts: 391 Joined: 22nd Aug 2008 Ride: 2002 AUII Fairlane Sportsman V8 Location: Roxby Downs |
Honestly if i put in a reco engine or a good 2nd hand engine i would of ripped out the radiator & took it to a radiator place to get it properly flushed & cleaned (you will be surprised how dirty they actually are).
Tectaloy flush is OK for a quick job but a proper job requires removal of the radiator & the header (plastic) tanks removed so all the gunk can get removed & cleaned. Run the Tectalloy radiator flush first though through the system & take the car for a minimum 1 hour drive (up to 2 hours if you think the cooling system is really dirty). Flush the system out let the hose/water run through the cooling system for at least another 30-60mins that way all the chemicals are removed totally. I usually do this whilst the engine is running. Once you have done that remove the radiator take it into a radiator place & ask them to clean/flush it out for you by removing the plastic tanks on the side of the radiator. They should charge you around 60 - 80 approx for a proper flush/clean. before you put the radiator back in & hook it all up, check all your hoses & wash/flush them too. Remove the overflow bottle & give that a good good flush with some water. Last (this is the hardest part) jack up the car & remove the heater hoses & stick the hose/water into the metal pipe & flush it out for a good 20mins & then do the other metal pipe as well (just above or below). So basically your flushing the inlet & then the outlet or vice versa of the heater core. This should pretty much give you a clean cooling system. Hook everything back up & then add some water (but don't fill it to the max) leave about 1 - 3 litres empty so then you can inspect for leaks. If no leaks are present then i would suggest adding the Tectalloy Gold (Green). If you feel daring you can add the tectalloy Gold before you put any water into the radiator however make sure you are 99.99% confident that most of the hoses & connections are water leak proof. If there are any leaks from here on you will be able to tell as the water will be green when it leaks. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 70 guests |
