|
| ef_falcon_95 |
|
|||
|
Hi all
I'll be putting in a 1521a soon into my el xr6 and just wondering cos it already has xr valve springs would there be much point in changing them?? Thanks
_________________ El XR6 Turbo |
|||
| Top | |
|||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
no
your XR springs 13-14yrs old...... they weaken over time i ran new crow XR springs, and the tuner said they were still noisy up top revs |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
What springs are stiffer then xr ?
_________________ El XR6 Turbo |
|||
| Top | |
|||
| krisisdog |
|
|||
|
crow cams make some heavy duty ones.
|
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
ill check out them out then
_________________ El XR6 Turbo |
|||
| Top | |
|||
| SLY EL |
|
|||
Age: 33 Posts: 48 Joined: 30th Jul 2010 Ride: 1996 Ford Fairmont Ghia EL Location: Wollongong |
ef_falcon_95 wrote: ill check out them out then Atomic Performance Parts, they also make some good valve springs for the 6. Website quotes ~$380 this is for the kit. This is for a full street/race kit.
_________________
|
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
hey
anyone have any reccomendations of what springs to use with a 1521a, i went on the crow website and they only have xr spec, also my car is a el xr6 thanks
_________________ El XR6 Turbo |
|||
| Top | |
|||
| dazza027 |
|
||
|
Whats with the double posting man? You only need to start one thread to ask one question. People will see it, trust me.
|
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
crow make XR springs, and another 2 stiffer springs on top of that
one set is the double springs, and the other is a single spring i think with specs between the XR & doubles its on page 3, underneath the crossflow ones http://www.crowcams.com.au/media/catalo ... %20all.pdf btw, you also have to make sure yours isnt a late EL with the hybrid AU head, cause then you will need different cam & springs..... |
||
| Top | |
||
| SLY EL |
|
|||
Age: 33 Posts: 48 Joined: 30th Jul 2010 Ride: 1996 Ford Fairmont Ghia EL Location: Wollongong |
FordFairmont wrote: btw, you also have to make sure yours isnt a late EL with the hybrid AU head, cause then you will need different cam & springs..... I'm pretty sure he's car was made at the same time as mine. December 1996. So just regular EL Tickford Head.
_________________
|
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
dazza027 wrote: Whats with the double posting man? You only need to start one thread to ask one question. People will see it, trust me. yeah i thought no one would see it 
_________________ El XR6 Turbo |
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
thanks for the replys , yeah mines late dec definatly not hybrid
_________________ El XR6 Turbo |
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
Had a look at the crow website and noticed that the double valve springs for el -au feb 98 Had to be machined , but they won't fit mine cos it's not a hybrid , other than that I couldn't find a double valve spring for el non hybrid , I'll give them a call , or get the atomic springs sly el suggested
_________________ El XR6 Turbo |
|||
| Top | |
|||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
its in the link i posted, page 3, table under the crossflow one
3 part numbers........ 1st is XR spec, 2nd are little more stiffer, and 3rd is the doubles i think you could get away with the middle ones.......... double springs put more pressure wear & tear on the valvetrain |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
Thanks for that mate , I opened the link before but didn't really understand the table
_________________ El XR6 Turbo |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 72 guests |
